Richard Grabbe | Doing some experimenting with my Miller 350P aluminum on a 2019 Toyota Tacoma materials rack @RichPhillipsLeather | Uploaded 1 year ago | Updated October 04 2023
I made this aluminum material rack for my 2019 Toyota Tacoma shop truck. I neede some stops on the rack so I welded some on. Typically I TIG weld aluminum but I decided to try MIG welding it with a Miller 350p aluminum welder set up with an XR-AlumaPro torch. The results were decent welds but not the prettiest welds. There are a few other things I could have done to get a little better results but sometimes experiments don’t always produce the best results. I think with practice I could get really good results with this MIG set up.
I made this aluminum material rack for my 2019 Toyota Tacoma shop truck. I neede some stops on the rack so I welded some on. Typically I TIG weld aluminum but I decided to try MIG welding it with a Miller 350p aluminum welder set up with an XR-AlumaPro torch. The results were decent welds but not the prettiest welds. There are a few other things I could have done to get a little better results but sometimes experiments don’t always produce the best results. I think with practice I could get really good results with this MIG set up.