Dodge Dakota & Durango Front Bumper Replacement @martinbuilt
Dodge Dakota & Durango Front Bumper Replacement  @martinbuilt
Uploaded February 2022 | Updated November 2026, 6 hours ago
This will cover the 2nd generation Dakota 97-04 and 1st gen Durango 98-03. I'm upgrading to a color match bumper. I have replaced the grille as well. It really changes the look and I love the way it turned out.
At 4:07 I explain the difference between the 2 bumpers. One has 4 bolts to remove the bumper and the other with 8 bolts. I was mistaken, the bumpers with 4 bolts are the one-piece bumpers and the 8 bolt bumpers are 2 pieces. It has nothing to do with the fog lights as I thought.

Amazon Affiliate
Dewalt 20 Volt Impact amzn.to/3f1lO9V
GEARWRENCH 1/2" Drive Locking Impact Extension amzn.to/3uKK9va
1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb amzn.to/3GDLXd2

Donate to Help Support Channel paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Q7WCDR84D2VDC&source=url

Facebook facebook.com/Martinbuilt-2351766611763181

Disclaimer:
FYI if you click any of the product links above and end up purchasing anything, I MAY get paid a small commission at no extra charge to you. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury is incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt can not guarantee against improper use or unauthorized modifications of this information.
Dodge Dakota & Durango Front Bumper ReplacementHow to Remove Front Coil Springs, Control Arms & Pitman ArmJK Rock Crawling at Logandale NV on the Shetter TrailThe Hazards of Polishing Magnesium can cause FiresHow to Install Belltech Bump Stops on a Dodge Dakota and DurangoHow to Delete Torque Management  99-04 Jeep Grand CherokeeEngine Wire Tuck on a 4.7L Jeep Grand Cherokee Part 1Installing Johnny Joints in the Upper Rear Control Arm 99-04 Jeep Grand CherokeeHow to Clean an Intake Manifold Inside & Out (Remove Carbon Buildup)How to Seal a Airplane Hanger DoorHow to Remove & Replace Harmonic Balancer Dodge, Jeep, Chrysler and Mitsubishi 3.7 & 4.7Martins 04 Jeep Grand Cherokee WJ Walk Around
martinbuilt |

Dodge Dakota & Durango Front Bumper Replacement

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER