Uploaded November 2025 | Updated November 2026, 2 days ago
🧰 Compact DIY Van Storage Box — Emergency Kit Shelf Built for Around £50!
This video shows how I built a compact, wall-mounted storage box for the inside of our van — perfect for keeping emergency gear, tools, and essentials tidy and accessible.
I built this using scrap wood and leftover hardware — but if you were to buy all the materials new, it would still come in around **£50**.
The box is securely screwed to the van’s 6mm plywood side panel — making it easy to remove or upgrade in future, without permanent fixings. It’s an open-top deep trough design, ideal for quick access and modular storage.
---
*Chapters*
00:00 Intro
00:31 Planning and Cutting Panels
02:06 Box Assembly with Brackets
03:15 Back Panel and Support Trim
04:01 Mock-Up and Layout Test
06:08 Teak Oil Finish
06:36 Van Panel Removal and Void Inspection
07:15 Batten Fitted for Secure Mounting
07:44 Fire Extinguisher Bracket Support
08:12 Final Assembly and Emergency Kit Placement
---
🔧 Key Features
• Compact footprint — fits neatly against van side panel
• Open-top trough design for fast access
• Fire extinguisher bracket mounted to box side
• Removable fixings — future-proofed for upgrades
• Finished with teak oil for durability
---
🧱 Step-by-Step Overview (for Replication)
• Planned and measured a compact emergency storage box layout
• Cut front, side, base, and back panels from plywood
• Smoothed edges and assembled with corner brackets and screws
• Pre-drilled screw holes for clean fixing
• Sanded and added support trim for strength
• Test-fitted components before final assembly
• Added a cup hook for future expansion — hang tote or drawstring bags below
• Fixed the box to the 6mm van side panel using corner braces and screws
• Applied teak oil to finish and protect the wood without sealing it permanently
• Removed the van’s plywood panel to inspect the void behind
• Measured depth and fitted a batten behind the panel for secure screw anchoring
• Added a 12mm plywood pad to support the fire extinguisher bracket
• Reinstalled the van panel, fixed the storage unit and bracket, and clipped the extinguisher in place
• Populated the storage box with emergency kit essentials — **Job Complete**
---
📦 Materials Used (Approximate Sizes)
• 12mm plywood — 4 small pieces
• 22mm pine plank — 150mm x 500mm
• Pine architrave — 50mm x 500mm
• 9 x corner braces
• 18 x No.8 x 12mm flange head self-tapping screws
• 12 x M5 x 20mm flange head self-tapping screws
• 1 x large cup hook
• Wood glue (small bottle)
• Teak oil (small bottle)
---
💰 Estimated Cost (If Buying New)
• Plywood offcuts: £7.50–£9.00
• Screws & fixings: £10–£14
• Corner braces: £15–£17
• Pine timber: £9–£12
• Teak oil & glue: £7–£10
**Total: ~£45–£55 depending on supplier**
---
📦 Example Contents (Shown in This Build)
• Emergency tyre foam
• Fire extinguisher (mounted to box side)
• First aid kit
• Warning triangle (folded in red case)
• Folding walking stick
• Wet wipes
• Hi-vis yellow jacket
---
🎯 Perfect for:
Van conversions, camper builds, emergency kit organisation, compact storage solutions, and anyone who values thoughtful, modular design.
👍 If you enjoy practical DIY builds focused on accessibility, safety, and modular design, don’t forget to like, subscribe, and share your own van storage ideas in the comments.
---
🔍 Tags (SEO & Discovery)
#VanStorage #DIYVanBuild #EmergencyKit #VanLifeDIY #StorageBox #CompactStorage #VanConversion #Under50 #DIYProjects #BritishDIY #VanOrganisation #TeakOilFinish #RemovableStorage #VanSafety #FireExtinguisherMount #EmergencyKitIdeas #ModularVanBuild
🧰 Compact DIY Van Storage Box — Emergency Kit Shelf Built for Around £50!
This video shows how I built a compact, wall-mounted storage box for the inside of our van — perfect for keeping emergency gear, tools, and essentials tidy and accessible.
I built this using scrap wood and leftover hardware — but if you were to buy all the materials new, it would still come in around **£50**.
The box is securely screwed to the van’s 6mm plywood side panel — making it easy to remove or upgrade in future, without permanent fixings. It’s an open-top deep trough design, ideal for quick access and modular storage.
---
*Chapters*
00:00 Intro
00:31 Planning and Cutting Panels
02:06 Box Assembly with Brackets
03:15 Back Panel and Support Trim
04:01 Mock-Up and Layout Test
06:08 Teak Oil Finish
06:36 Van Panel Removal and Void Inspection
07:15 Batten Fitted for Secure Mounting
07:44 Fire Extinguisher Bracket Support
08:12 Final Assembly and Emergency Kit Placement
---
🔧 Key Features
• Compact footprint — fits neatly against van side panel
• Open-top trough design for fast access
• Fire extinguisher bracket mounted to box side
• Removable fixings — future-proofed for upgrades
• Finished with teak oil for durability
---
🧱 Step-by-Step Overview (for Replication)
• Planned and measured a compact emergency storage box layout
• Cut front, side, base, and back panels from plywood
• Smoothed edges and assembled with corner brackets and screws
• Pre-drilled screw holes for clean fixing
• Sanded and added support trim for strength
• Test-fitted components before final assembly
• Added a cup hook for future expansion — hang tote or drawstring bags below
• Fixed the box to the 6mm van side panel using corner braces and screws
• Applied teak oil to finish and protect the wood without sealing it permanently
• Removed the van’s plywood panel to inspect the void behind
• Measured depth and fitted a batten behind the panel for secure screw anchoring
• Added a 12mm plywood pad to support the fire extinguisher bracket
• Reinstalled the van panel, fixed the storage unit and bracket, and clipped the extinguisher in place
• Populated the storage box with emergency kit essentials — **Job Complete**
---
📦 Materials Used (Approximate Sizes)
• 12mm plywood — 4 small pieces
• 22mm pine plank — 150mm x 500mm
• Pine architrave — 50mm x 500mm
• 9 x corner braces
• 18 x No.8 x 12mm flange head self-tapping screws
• 12 x M5 x 20mm flange head self-tapping screws
• 1 x large cup hook
• Wood glue (small bottle)
• Teak oil (small bottle)
---
💰 Estimated Cost (If Buying New)
• Plywood offcuts: £7.50–£9.00
• Screws & fixings: £10–£14
• Corner braces: £15–£17
• Pine timber: £9–£12
• Teak oil & glue: £7–£10
**Total: ~£45–£55 depending on supplier**
---
📦 Example Contents (Shown in This Build)
• Emergency tyre foam
• Fire extinguisher (mounted to box side)
• First aid kit
• Warning triangle (folded in red case)
• Folding walking stick
• Wet wipes
• Hi-vis yellow jacket
---
🎯 Perfect for:
Van conversions, camper builds, emergency kit organisation, compact storage solutions, and anyone who values thoughtful, modular design.
👍 If you enjoy practical DIY builds focused on accessibility, safety, and modular design, don’t forget to like, subscribe, and share your own van storage ideas in the comments.
---
🔍 Tags (SEO & Discovery)
#VanStorage #DIYVanBuild #EmergencyKit #VanLifeDIY #StorageBox #CompactStorage #VanConversion #Under50 #DIYProjects #BritishDIY #VanOrganisation #TeakOilFinish #RemovableStorage #VanSafety #FireExtinguisherMount #EmergencyKitIdeas #ModularVanBuild











• [Places & Events Playlist](https://www.youtube.com/playlist?list=PLLAn2jzHlYtP_hoiKh2HaaKn_JxK0aXfD)
_Subscribe for more travel vlogs, heritage stories, and wildlife encounters across Britain and Europe._
#Dovercourt #FlatfordMill #ConstableCountry #BritishHeritage #EssexDrive #SuffolkTravel #TravelVlog #PhoenixPavilions #NationalTrust #JohnConstable #DedhamVale #ScenicDrive #UKRoadTrip #TourOfBritain #HistoricEngland Flatford Mill Day Trip from Dovercourt | Scenic Drive & Real-Life Road Drama](https://i.ytimg.com/vi/5mfAas1gMDU/mqdefault.jpg)