Uploaded February 2026 | Updated November 2026, 2 hours ago
I didn't invest in the laminator or the film from EufyMake. But when I realized I wanted to make UV stickers I started messing around to find a solution that doesn't require it. It turns out there's another use for Wham Bam's new Ultim8 Jig that they probably didn't expect... Today I'm going to show you how to make UV stickers without A/B film.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
Where you can find the Wham Bam Mat:
bit.ly/4s8hPxT
Here's the list of things I used (minus the Xtool AP2 Filter):
Rugged Comfort Respirator: amzn.to/3ZJg9y6
P100/60926 Filters: amzn.to/4t9qrVH
Chapters
00:00 Intro
01:22 An Off-Label Use of the Ultim8 Jig
03:26 What Youβll Need
05:31 Prepping Design in Software
06:21 Transferring Sticker from Mat to Transfer Tape
07:53 Spraying Adhesive and Applying Design to Cup
08:52 Applying another Design to a 3D Print
09:43 Outro
π Curious about crafting with tech? Subscribe for tutorials on laser crafting, 3D printing, and DIY experiments that make innovation fun!
youtube.com/@LabcraftStudio/?sub_confirmation=1
β Important Link to Follow
ποΈ Etsy
etsy.com/shop/labcraftstudio/?etsrc=sdt
β Stay Connected With Me.
π Instagram: instagram.com/LabcraftStudio
π Website: labcraftstudio.com
π© For Business Inquiries: sarah@labcraftstudio.com
=============================
π¬ Recommended Playlists
π Laser Cutting
youtube.com/playlist?list=PLGTxgui-75qJbAiyM9saCLaWu3c8H0nhj
π Cricut Tutorials
youtube.com/playlist?list=PLGTxgui-75qJjvdNOcwFvh6fQqY6Y1v0F
π¬ WATCH MY OTHER VIDEOS:
π How I Make 3D Printed Bookmarks Using Bambu's MakerLab - Cute Gift Ideas
youtube.com/watch?v=EH82YKxiJCA
π How To Create Full Sticker Sheets With Cricut (No Waste) Step-By-Step Tutorial!
youtube.com/watch?v=xQwhPpJzmr4
π How To Sublimate 3D Prints Directly On Plate - Easy PLA & PETG Sublimation Tips
youtube.com/watch?v=FG60jMIte5k
π Gweike Cloud Pro Laser: Is It The Best Laser Cutter? My Honest Review
youtube.com/watch?v=_h6PKID__7Y
π How I Started A 3D Printing Business: Best Guide For Small Businesses (2024)
youtube.com/watch?v=WXeMOCd0bp
=============================
#Eufymake #E1 #uvprinter #WhamBam #uvdtfsticker
β οΈ Disclaimer: I do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your research.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
βοΈ Copyright Notice: This video and my YouTube channel contain dialogue, music, and images that are the property of Labcraft Studio. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to my YouTube channel is provided.
Β© Labcraft Studio
I didn't invest in the laminator or the film from EufyMake. But when I realized I wanted to make UV stickers I started messing around to find a solution that doesn't require it. It turns out there's another use for Wham Bam's new Ultim8 Jig that they probably didn't expect... Today I'm going to show you how to make UV stickers without A/B film.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
Where you can find the Wham Bam Mat:
bit.ly/4s8hPxT
Here's the list of things I used (minus the Xtool AP2 Filter):
Rugged Comfort Respirator: amzn.to/3ZJg9y6
P100/60926 Filters: amzn.to/4t9qrVH
Chapters
00:00 Intro
01:22 An Off-Label Use of the Ultim8 Jig
03:26 What Youβll Need
05:31 Prepping Design in Software
06:21 Transferring Sticker from Mat to Transfer Tape
07:53 Spraying Adhesive and Applying Design to Cup
08:52 Applying another Design to a 3D Print
09:43 Outro
π Curious about crafting with tech? Subscribe for tutorials on laser crafting, 3D printing, and DIY experiments that make innovation fun!
youtube.com/@LabcraftStudio/?sub_confirmation=1
β Important Link to Follow
ποΈ Etsy
etsy.com/shop/labcraftstudio/?etsrc=sdt
β Stay Connected With Me.
π Instagram: instagram.com/LabcraftStudio
π Website: labcraftstudio.com
π© For Business Inquiries: sarah@labcraftstudio.com
=============================
π¬ Recommended Playlists
π Laser Cutting
youtube.com/playlist?list=PLGTxgui-75qJbAiyM9saCLaWu3c8H0nhj
π Cricut Tutorials
youtube.com/playlist?list=PLGTxgui-75qJjvdNOcwFvh6fQqY6Y1v0F
π¬ WATCH MY OTHER VIDEOS:
π How I Make 3D Printed Bookmarks Using Bambu's MakerLab - Cute Gift Ideas
youtube.com/watch?v=EH82YKxiJCA
π How To Create Full Sticker Sheets With Cricut (No Waste) Step-By-Step Tutorial!
youtube.com/watch?v=xQwhPpJzmr4
π How To Sublimate 3D Prints Directly On Plate - Easy PLA & PETG Sublimation Tips
youtube.com/watch?v=FG60jMIte5k
π Gweike Cloud Pro Laser: Is It The Best Laser Cutter? My Honest Review
youtube.com/watch?v=_h6PKID__7Y
π How I Started A 3D Printing Business: Best Guide For Small Businesses (2024)
youtube.com/watch?v=WXeMOCd0bp
=============================
#Eufymake #E1 #uvprinter #WhamBam #uvdtfsticker
β οΈ Disclaimer: I do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your research.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
βοΈ Copyright Notice: This video and my YouTube channel contain dialogue, music, and images that are the property of Labcraft Studio. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to my YouTube channel is provided.
Β© Labcraft Studio










