Uploaded May 2023 | Updated November 2026, 3 hours ago
This project is sponsored by PCBWAY pcbway.com/?from=MirkoP
This time I will present you a very simple way to make an effective ion thruster. I got the idea from the plasma channel "youtube.com/@PlasmaChannel" where several such devices are described in the previous period.
I tried to construct as simple as possible such a device that does not require precise 3D printed parts, so that it can be made by less experienced makers. From the material we need an ordinary 2.5mm copper wire used in house installations, a small metal plate (in this case aluminum), and a high voltage source.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.
Detailed instructions at:
hackster.io/mircemk/diy-simplest-multistage-ion-thrust-plasma-engine-2591ea
Plasma channel project:
youtube.com/watch?v=nrEBoPYS4ns&t=499s
If you are interested in this area, look at the Playlist with all my High Voltage projects at:
youtube.com/playlist?list=PLAxrqEdgtyUV5SriPejNitf6dWFyW8zPQ
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#electronics #highvoltage #ionengine #space #pcbway
This project is sponsored by PCBWAY pcbway.com/?from=MirkoP
This time I will present you a very simple way to make an effective ion thruster. I got the idea from the plasma channel "youtube.com/@PlasmaChannel" where several such devices are described in the previous period.
I tried to construct as simple as possible such a device that does not require precise 3D printed parts, so that it can be made by less experienced makers. From the material we need an ordinary 2.5mm copper wire used in house installations, a small metal plate (in this case aluminum), and a high voltage source.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.
Detailed instructions at:
hackster.io/mircemk/diy-simplest-multistage-ion-thrust-plasma-engine-2591ea
Plasma channel project:
youtube.com/watch?v=nrEBoPYS4ns&t=499s
If you are interested in this area, look at the Playlist with all my High Voltage projects at:
youtube.com/playlist?list=PLAxrqEdgtyUV5SriPejNitf6dWFyW8zPQ
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#electronics #highvoltage #ionengine #space #pcbway










