DIY Sim Racing Button Box | Cheap and Simple! @ChrisHaye
DIY Sim Racing Button Box | Cheap and Simple!  @ChrisHaye
Uploaded September 2021 | Updated September 2026, 2 weeks ago
I found myself needing 3 new sim racing button boxes for the rigs in the studio, and being a miserly sort, I thought let's do this as cheap as possible. So, here's how I built these 4 DIY sim racing button box for less than £60 all in, for all 4.

Parts Used:

Zero Delay Arcade USB Encoder
200x120x75mm Junction Box
12mm Momentary Push Buttons
18mm Momentary Push Buttons
24mm Arcade Buttons
Carbon Vinyl Wrap (Don't do it!)

A couple of years ago I created a set of Sim Racing Stream Deck icons, which could easily be adapted if you plan on making a numpad based button box: dropbox.com/s/sjhthxtd9ppw0e2/CHSR%20Stream%20Deck%20Icons%20V1.zip?dl=0

#ChrisHaye #SimRacing
DIY Sim Racing Button Box | Cheap and Simple!Talking Sims With: Zach [Turn Racing] | Boutique Sim Racing WheelsSim Racing - Were Going To Need A Better Name [Discussion]Assetto Corsa Competizione Cars #1: British BruisersSim Racing is Good For The SoulTurn Racing R20 Sim Racing Wheel ReviewMy First Real Race Was… Eventful! Small Car, Big Racing Ep2Assetto Corsa Competizione GT4 Preview EventWhats The Best F1 Racing Sim?Assetto Corsa Competizione GT4 Pack | Comprehensive PreviewRaceroom Brno & Vålerbanen Preview!Learning the Ropes With WRC Driver Jon Armstrong TFZxWRC
Chris Haye |

DIY Sim Racing Button Box | Cheap and Simple!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER