DIY Ramp Fix for Mobility Scooter – Telescopic Mod & Anti-Slip Inserts | Accessibility Upgrade @NathanvilleOrgUk
DIY Ramp Fix for Mobility Scooter – Telescopic Mod & Anti-Slip Inserts | Accessibility Upgrade  @NathanvilleOrgUk
Uploaded August 2025 | Updated November 2026, 2 days ago
⚠️ UPDATE: This build has been superseded. Watch the improved version here → youtu.be/MoZp4t_FKVY

*DIY Ramp Fix for Mobility Scooter*
_Modifying telescopic aluminium ramps with wooden inserts, locking screws, and anti-slip tape for safer, smoother scooter access._

We bought a pair of heavy-duty telescopic aluminium ramps—designed mainly for wheelchairs—on a 28-day trial, hoping they’d work with a small Motability scooter. But the scooter kept grounding on the ramp ridges, especially at the top and bottom, due to its low chassis and small wheels.

After lots of research, these ramps were the only ones that ticked all our boxes. We didn’t want a hoist or fixed ramps—they take up too much space in the EV car boot, especially when travelling without the scooter.

As a proof of concept, we placed scrap wood in the ramp troughs to raise the wheels—and it worked. This video documents the full DIY journey: sourcing timber, cutting to fit both 4ft and 7ft ramp lengths, sanding, securing with locking screws, and applying anti-slip tape.

*Why this matters:*
• Avoids grounding on ramp ridges
• No need for bulky hoists or fixed ramps
• Inserts are removable and space-saving
• Affordable and practical DIY solution

---

*🧰 Materials Used:*
• Telescopic aluminium ramps (4ft & 7ft)
• Timber planks (150mm wide, 25mm thick)
• Flat-ended screws
• Anti-slip tape
• Belt sander
• Drill + countersink bit
• White spirit (for cleaning)

---

*💡 Broader Inspiration:*
Even if you’re not working with a mobility scooter, this project might spark ideas for other accessibility or transport challenges. The method shown here—raising wheel height, improving grip, and creating removable inserts—could be adapted for:
• Garden trolley ramps
• Wheelbarrow access over steps
• Temporary wheelchair access for events
• Loading ramps for small equipment or tools

It’s a great example of solving a problem with simple materials, a bit of ingenuity, and a belt sander. No scooters were harmed in the making of this video—though one did get a bit stuck and sulked for a while.

---

*🗣️ Viewer Interaction:*
Got your own DIY ramp fix or accessibility hack? Drop it in the comments—we’d love to hear how you’ve solved similar problems.

---

*🔍 SEO Boost:*
This DIY ramp mod is ideal for anyone looking to improve scooter access, avoid grounding, and create a safer, portable solution for mobility aids.

---

*🧰 For Dummies: Step-by-Step Guide*
1. **Measure ramp trough width**
2. **Buy timber (150mm wide, 25mm thick)**
3. **Cut timber to fit 4ft and 3ft sections per ramp**
4. **Test fit in ramp troughs**
5. **Use screw gauge to select drill bit (No.6)**
6. **Mark and drill pilot holes in wood**
7. **Countersink with 12mm bit for flush screw heads**
8. **Install flat-ended screws into lower planks**
9. **Use second plank as template to mark ramp holes**
10. **Drill 12mm holes in aluminium ramps for wriggle room**
11. **Test fit locking system for secure placement**
12. **Secure wood for sanding (screwed to picnic table)**
13. **Sand surface smooth and bevel top edges**
14. **Clean with white spirit and let dry**
15. **Apply anti-slip tape—press from centre outward**
16. **Leave tape to cure for 24 hours**
17. **Final test with scooter at both ramp lengths**

---

*⏱️ Chapters:*
@00:00 – Intro
@01:46 – Proof of concept—testing if planks can smooth the angle transitions
@02:24 – The wood used for the project
@02:53 – Measuring ramps for cutting wood to length
@03:32 – Button to press, to change the length of the telescopic ramps
@03:53 – Cutting the wood to size
@04:53 – Testing the cut wood in the ramps for fit
@05:12 – Designing and creating simple mechanism to hold wood in place in ramps, when in use
@07:42 – Testing mechanism to ensure it fits easily, and will hold wood in place in ramps, when ramps in use
@08:20 – Preparing the wood for applying the anti-slip tape
@10:10 – Applying the anti-slip tape to the wood
@10:58 – DIY Project complete

---

🔗 *Explore more DIY projects in our playlist:*
[DIY, Gardening & Tech Projects for the Home](youtube.com/playlist?list=PLLAn2jzHlYtPdKaU84Wl25Fe0CecdAhsA)

---

#MobilityScooter #DIYRamp #Accessibility #Motability #TelescopicRamp #AntiSlipTape #Woodworking #DIYProject #BritishDIY #ArthurBuilds #NathanvilleUK #ScooterRamp #DisabilityAccess #HomeImprovement #DIYAdaptation #EVSolutions #RuralDIY #ScooterMods #RampUpgrade #FlatEndedScrews #AntiSlipMod #DIYInspiration #AdaptiveDesign
DIY Ramp Fix for Mobility Scooter – Telescopic Mod & Anti-Slip Inserts | Accessibility UpgradeLavenham Village, Suffolk – Medieval Tudor Streets & The Swan Coaching InnFiley Dams Nature Reserve | Wetland Birds & WildlifeEssex Road Rage Caught on Dash Cam – A Shocking Encounter! #ShortsDay of the Dead Comes to Glastonbury Carnival! 💀✨ #shortsAwkward Moments with Classic Land Rovers #shortsRed Arrows Over Clacton! 🇬🇧 Epic Airshow & Seaside Adventure in EssexSaltburn-by-the-Sea Pier | North Yorkshire Coastal Views & The Ship InnHoliday Cottage Tour: Lowal House, Wimbish | Saffron Walden Area Travel VlogDiscover the Magic of A House for Essex #shortsJourney to the Past: The Legend of Saint Philbert #shortsBeamish Museum Tour: Inside the 1900s Town, High Street Shops & Steam Railway
NathanvilleUK |

DIY Ramp Fix for Mobility Scooter – Telescopic Mod & Anti-Slip Inserts | Accessibility Upgrade

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER