Uploaded March 2024 | Updated September 2026, 3 weeks ago
patreon.com/QueenCityMinis
Join as a free member, or as a paying member for $3/month. I really appreciate your support.
Miter Shears- this pair is highly rated and has replaceable blades
amzn.to/3LchlUy
Cheap set of needle files: amzn.to/3wWX5S5
Variety of popsicle stick sizes & coffee stir sticks:
amzn.to/4ckIDmK
Cut list:
Front: 6 pieces
x2 side pieces- 3 7/8" inches
Top- 2 1/2"
Cut the middle & bottom pieces to fit inside. Should be just shy of 1 3/4" inches
Side panels: 5 pieces
x2 Side pieces- 3 7/8" inches
Top 1 7/8"
Bottom 1 1/8"
Middle coffee stir stick- trim to fit in between the top and bottom piece. Should be about 3 1/4".
The top piece goes above the two side pieces with the bottom piece on the inside & a coffee stir stick centered above it.
Doors- cut outer frame pieces and coffee stir stick center to fit
Small door-
2x Side pieces 1 1/4"
Top & bottom 1 3/8"
Coffee stir stick center about 5/8"
Large door
2x Side pieces 2"
Top & bottom 1 3/8"
Coffee stir stick center about 1 1/2"
Top 2 7/8" x 2 1/8"
Cut foam core shelves & back to fit.
Total dimensions, including casters,
4 1/2" tall x 2 1/8" deep x 2 7/8" wide
One of my Patrons requested this project! I made an ice box using popsicle sticks & other junk. Even if you don't plan to make an ice box, there are plenty of fun techniques you can apply to other projects.
You can buy the Chrysnbon ice box kit here from my favorite dollhouse store, Earth & Tree Miniatures:
earthntree.com/miniatures/index.php?main_page=product_info&cPath=154_853_271&products_id=7507
My fave things:
2 oz bottle of Diamond Glaze
amzn.to/3zmMLR1
8 oz bottle of Diamond Glaze
amzn.to/3zpiMbm
Double-sided flooring tape
amzn.to/423tJwL
Mini Clamps
amzn.to/3vBdc6U
Heat gun- I use mine to quickly dry paint, soften the glue to dismantle furniture and quickly cure polymer clay without an oven. Gets a lot hotter than a hair dryer.
amzn.to/3YBAIcH
Craft heat gun that doesn't get as hot as mine
amzn.to/3ZZ5wWe
Nail Studs- I like these because there are a variety of sizes in silver and brass
amzn.to/3JEtJMd
For under $10, you get a variety of jump rings, lobster clasps and pliers
amzn.to/3Zu7sGd
Paper fasteners & 1/8" hole punch
amzn.to/3O5nYI6
11 piece clay tool set for $10
amzn.to/4bLvW49
I have lots of projects planned ranging from abandoned miniatures, furniture makeovers, dioramas, accessories, kits and Dollhouse Miniatures in multiple scales. I'm also working on a large Harry Potter build in 1" scale. I'm making the Gryffindor Common Room from scratch.
Please Like, Comment & Subscribe to support my efforts and so you don't miss out on future videos.
Thank you,
Shyra
*As an Amazon associate, I earn from qualifying purchases. Thank you for supporting me and the channel by shopping from with above-listed affiliate links. Only Amazon links are affiliate links.
patreon.com/QueenCityMinis
Join as a free member, or as a paying member for $3/month. I really appreciate your support.
Miter Shears- this pair is highly rated and has replaceable blades
amzn.to/3LchlUy
Cheap set of needle files: amzn.to/3wWX5S5
Variety of popsicle stick sizes & coffee stir sticks:
amzn.to/4ckIDmK
Cut list:
Front: 6 pieces
x2 side pieces- 3 7/8" inches
Top- 2 1/2"
Cut the middle & bottom pieces to fit inside. Should be just shy of 1 3/4" inches
Side panels: 5 pieces
x2 Side pieces- 3 7/8" inches
Top 1 7/8"
Bottom 1 1/8"
Middle coffee stir stick- trim to fit in between the top and bottom piece. Should be about 3 1/4".
The top piece goes above the two side pieces with the bottom piece on the inside & a coffee stir stick centered above it.
Doors- cut outer frame pieces and coffee stir stick center to fit
Small door-
2x Side pieces 1 1/4"
Top & bottom 1 3/8"
Coffee stir stick center about 5/8"
Large door
2x Side pieces 2"
Top & bottom 1 3/8"
Coffee stir stick center about 1 1/2"
Top 2 7/8" x 2 1/8"
Cut foam core shelves & back to fit.
Total dimensions, including casters,
4 1/2" tall x 2 1/8" deep x 2 7/8" wide
One of my Patrons requested this project! I made an ice box using popsicle sticks & other junk. Even if you don't plan to make an ice box, there are plenty of fun techniques you can apply to other projects.
You can buy the Chrysnbon ice box kit here from my favorite dollhouse store, Earth & Tree Miniatures:
earthntree.com/miniatures/index.php?main_page=product_info&cPath=154_853_271&products_id=7507
My fave things:
2 oz bottle of Diamond Glaze
amzn.to/3zmMLR1
8 oz bottle of Diamond Glaze
amzn.to/3zpiMbm
Double-sided flooring tape
amzn.to/423tJwL
Mini Clamps
amzn.to/3vBdc6U
Heat gun- I use mine to quickly dry paint, soften the glue to dismantle furniture and quickly cure polymer clay without an oven. Gets a lot hotter than a hair dryer.
amzn.to/3YBAIcH
Craft heat gun that doesn't get as hot as mine
amzn.to/3ZZ5wWe
Nail Studs- I like these because there are a variety of sizes in silver and brass
amzn.to/3JEtJMd
For under $10, you get a variety of jump rings, lobster clasps and pliers
amzn.to/3Zu7sGd
Paper fasteners & 1/8" hole punch
amzn.to/3O5nYI6
11 piece clay tool set for $10
amzn.to/4bLvW49
I have lots of projects planned ranging from abandoned miniatures, furniture makeovers, dioramas, accessories, kits and Dollhouse Miniatures in multiple scales. I'm also working on a large Harry Potter build in 1" scale. I'm making the Gryffindor Common Room from scratch.
Please Like, Comment & Subscribe to support my efforts and so you don't miss out on future videos.
Thank you,
Shyra
*As an Amazon associate, I earn from qualifying purchases. Thank you for supporting me and the channel by shopping from with above-listed affiliate links. Only Amazon links are affiliate links.
