Uploaded February 2021 | Updated September 2026, 2 hours ago

---

How to Make a Lathe Machine Using Washing Machine Motor

Part 1 - making lathe bed and headstock
Part 2 - tailstock and tool rest [the second part will be released very soon]

Free plans & 3D CAD model - you will see in the second part. Subscribe not to miss!

🔨 To make it I used:
Ruler Marking Gauge - youtu.be/XcQ8Lidw7P4
Drill Press Machine - youtu.be/O6aRoxANuLI
DIY Pocket Hole Jig - youtu.be/yWx-zw_dBFU
Homemade Table Saw - youtu.be/X-97raJzIow
Crosscut sled - mazaydiy.com/crosscut-sled
Table saw fence - mazaydiy.com/table-saw-fence
Angle Grinder Stand - youtu.be/WFyA4ACLZt8
Jigsaw table - youtu.be/qhrJ3ffeLSI
T-Track Hold Down Clamps - youtu.be/ZXIPJDy8d-s
Drill Press Table - youtu.be/_Dly7SilTnQ

#lathe #tools #woodworking #DIY

00:14 - circular saw shaft restoration
01:15 - making lathe long bed
05:21 - headstock base
07:35 - legs
09:43 - mounting base
12:26 - spindle
14:44 - washing motor mount
18:44 - power and speed control
18:53 - Hall-effect sensor
19:31 - Belt Tensioner
20:52 - First run!