AlphaPhoenix | DIY Lasercut Christmas Tree @AlphaPhoenixChannel | Uploaded 6 years ago | Updated 19 hours ago
This is a lasercut christmas tree model. The entire project is made from cheap 0.200" plywood you can buy at a hardware store (no extra dowels or anything) so it's really easy to cut out and assemble! Hope you enjoy!

Part files:
- .dxf, .pdf, and .ai
- https://www.thingiverse.com/thing:2682743

Materials:
- 0.200" plywood (I used cheap underlayment)
- Glue (wood glue or superglue)
- Spray polyurethane
- Scratch remover/stain or permanent marker

Tools:
- laser cutter (preferably at least 40W)
- files/sandpaper



Music in this video:

I dunno by grapes, is licensed under a Creative Commons: Attribution License (https://creativecommons.org/licenses/...)
Source: http://ccmixter.org/files/grapes/16626

Arriba Mami by Jingle Punks is licensed under a Creative Commons license

Acid Jazz by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: https://freemusicarchive.org/music/Ke...
Artist: http://incompetech.com/

O Christmas Tree (Instrumental) by Jingle Punks is licensed under a Creative Commons license

Sunday Plans by Silent Partner is licensed under a Creative Commons license

Arcadia - Wonders by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/