HomeMadeModern | DIY Korean BBQ Table @HomeMadeModern | Uploaded 11 months ago | Updated 1 hour ago
I made a DIY wood fired Korean BBQ table that uses a Solo Stove so that no propane or gas is required. The concrete table is made from Quikrete 5000 Concrete mix. I used about 12 of the 50lbs bags. I used 1/2" rebar but wire mesh should also work if you don't have tools to cut steel. The concrete pieces weigh about 140-160 lbs each but I think I will make the next version of the concert table about a foot linger and 6 inches wider. Vinyl baseboard trim is a great low cost flexible material for concrete molds or forms and is available at most Home Depots. I used 3/4" thick melamine for the rest of the formwork.
Tool Sponsors:
Ryobi Jigsaw
https://shopstyle.it/l/bCgAZ
Ryobi Circular Saw
https://shopstyle.it/l/bCgBQ
Ryobi HP drill and Driver
https://shopstyle.it/l/bCgB0
Kreg Pocket-Hole Jig 720PRO
kregtool.com/shop/pocket-hole-joinery/pocket-hole-jigs/kreg-pocket-hole-jig-720pro/KPHJ720PRO.html
Kreg Corner clamps
kregtool.com/shop/clamping/clamps/90%C2%B0-corner-clamp/KHCCC.html
Solo stove I used:
solostove.com/en-us/p/solo-stove-bonfire?sku=SSBON-2.0
Follow us on Instagram: instagram.com/benjaminuyeda
For additional projects and information check out our website:
http://www.homemade-modern.com
I made a DIY wood fired Korean BBQ table that uses a Solo Stove so that no propane or gas is required. The concrete table is made from Quikrete 5000 Concrete mix. I used about 12 of the 50lbs bags. I used 1/2" rebar but wire mesh should also work if you don't have tools to cut steel. The concrete pieces weigh about 140-160 lbs each but I think I will make the next version of the concert table about a foot linger and 6 inches wider. Vinyl baseboard trim is a great low cost flexible material for concrete molds or forms and is available at most Home Depots. I used 3/4" thick melamine for the rest of the formwork.
Tool Sponsors:
Ryobi Jigsaw
https://shopstyle.it/l/bCgAZ
Ryobi Circular Saw
https://shopstyle.it/l/bCgBQ
Ryobi HP drill and Driver
https://shopstyle.it/l/bCgB0
Kreg Pocket-Hole Jig 720PRO
kregtool.com/shop/pocket-hole-joinery/pocket-hole-jigs/kreg-pocket-hole-jig-720pro/KPHJ720PRO.html
Kreg Corner clamps
kregtool.com/shop/clamping/clamps/90%C2%B0-corner-clamp/KHCCC.html
Solo stove I used:
solostove.com/en-us/p/solo-stove-bonfire?sku=SSBON-2.0
Follow us on Instagram: instagram.com/benjaminuyeda
For additional projects and information check out our website:
http://www.homemade-modern.com