Bosch DIY and Garden UK | DIY Knowledge: how to lay laminate flooring @BoschDIYpowertoolsUK | Uploaded June 2021 | Updated October 2024, 6 hours ago.
Want to know how to lay a #laminatefloor yourself? We show you how in five easy steps.
All you need are a few tools and a little know-how, provided by us.
00:00 Installing laminate flooring
00:03 Measure and saw laminate to length
01:05 Prepare the subfloor
01:11 Install the first row
01:22 Install the other laminate strips
01:38 Fill any gaps
-------------------------------------------------------------------------------------------------------------------------------------
*DIY: How to install laminate flooring in five simple steps*
Before installing laminate flooring, you will need the following tools and materials:
*Tools:*
• Jigsaw
• Advanced TableCut 52
*Materials:*
• Laminate strips with click system
• Vapour barrier liner
• Soundproofing insulation
• Spacers (10mm thick)
*How to #laylaminateflooring: a step-by-step DIY guide*
Installing new laminate flooring can feel like a daunting task if you have never done it before. We want to show you how straightforward it can be.
*1. Measure and saw laminate to length* – Before you start, you will need to take accurate measurements of the room, including any special corners or caveats for pipes, radiators, etc. Mark your measurements on the laminate strips and cut to length. We recommend using a table saw for accurate straight and angled cuts.
Tip: Installing laminate flooring perpendicular to the direction of a small room can make it appear larger. Just remember, laminate flooring is typically laid lengthwise to a room’s main light source.
*2. Prepare the subfloor* – Before you start thinking about how to fit your laminate flooring, you need to prepare the subfloor. First, level out any major bumps or cracks with filler. Then, put down a vapour barrier followed by soundproofing insulation.
Tip: Vapour strips need to overlap and be sealed with adhesive tape to be effective.
*3. Install the first row* – Start by placing a 10mm spacer between the wall and the first set of strips – this gives the wood space to expand. Once installed, ensure everything is straight to avoid tension in the joints.
*4. Install the other laminate strips* – Most laminate uses a click system, meaning you should install diagonally and gently press down. Connect long sides first and gently tap to ensure everything is secured.
*5. Fill any gaps* – Small gaps are likely at the corners of a room. Measure the gap and transfer to the laminate, then cut with a jigsaw. Click into place, remembering to leave 10mm between the laminate and the wall.
This may take a little patience if you have to account for pipes or other obstructions. Let us know in the comments if you have any tips and tricks of your own when it comes to laying laminate flooring.
Want to learn more? Read the full set of instructions on our website: bosch-diy.com/gb/en/all-about-diy/installing-laminate-flooring
Find all *products* here:
Jigsaw bosch-diy.com/gb/en/power-tools/saws/jigsaws
Advanced TableCut 52 bosch-diy.com/de/de/p/advancedtablecut-52-0603b12001
Interested in more DIY projects? *Check out our DIY & Garden Magazine* for a full collection of home project ideas and trends: bosch-diy.com/gb/en/all-about-diy
Like our videos and want to keep updated with new content? *Subscribe to our channel:* youtube.com/@BoschDIYpowertoolsUK/featured
We regularly update our social channels with all the latest DIY tips and trends for home and garden projects. Get inspired and *follow us today:*
*Facebook:* facebook.com/BoschDIYpowertoolsUK
*Instagram:* instagram.com/boschdiyandgarden/?hl=en
*Pinterest:* pinterest.co.uk/BoschDIYandGardenUK
Want to know how to lay a #laminatefloor yourself? We show you how in five easy steps.
All you need are a few tools and a little know-how, provided by us.
00:00 Installing laminate flooring
00:03 Measure and saw laminate to length
01:05 Prepare the subfloor
01:11 Install the first row
01:22 Install the other laminate strips
01:38 Fill any gaps
-------------------------------------------------------------------------------------------------------------------------------------
*DIY: How to install laminate flooring in five simple steps*
Before installing laminate flooring, you will need the following tools and materials:
*Tools:*
• Jigsaw
• Advanced TableCut 52
*Materials:*
• Laminate strips with click system
• Vapour barrier liner
• Soundproofing insulation
• Spacers (10mm thick)
*How to #laylaminateflooring: a step-by-step DIY guide*
Installing new laminate flooring can feel like a daunting task if you have never done it before. We want to show you how straightforward it can be.
*1. Measure and saw laminate to length* – Before you start, you will need to take accurate measurements of the room, including any special corners or caveats for pipes, radiators, etc. Mark your measurements on the laminate strips and cut to length. We recommend using a table saw for accurate straight and angled cuts.
Tip: Installing laminate flooring perpendicular to the direction of a small room can make it appear larger. Just remember, laminate flooring is typically laid lengthwise to a room’s main light source.
*2. Prepare the subfloor* – Before you start thinking about how to fit your laminate flooring, you need to prepare the subfloor. First, level out any major bumps or cracks with filler. Then, put down a vapour barrier followed by soundproofing insulation.
Tip: Vapour strips need to overlap and be sealed with adhesive tape to be effective.
*3. Install the first row* – Start by placing a 10mm spacer between the wall and the first set of strips – this gives the wood space to expand. Once installed, ensure everything is straight to avoid tension in the joints.
*4. Install the other laminate strips* – Most laminate uses a click system, meaning you should install diagonally and gently press down. Connect long sides first and gently tap to ensure everything is secured.
*5. Fill any gaps* – Small gaps are likely at the corners of a room. Measure the gap and transfer to the laminate, then cut with a jigsaw. Click into place, remembering to leave 10mm between the laminate and the wall.
This may take a little patience if you have to account for pipes or other obstructions. Let us know in the comments if you have any tips and tricks of your own when it comes to laying laminate flooring.
Want to learn more? Read the full set of instructions on our website: bosch-diy.com/gb/en/all-about-diy/installing-laminate-flooring
Find all *products* here:
Jigsaw bosch-diy.com/gb/en/power-tools/saws/jigsaws
Advanced TableCut 52 bosch-diy.com/de/de/p/advancedtablecut-52-0603b12001
Interested in more DIY projects? *Check out our DIY & Garden Magazine* for a full collection of home project ideas and trends: bosch-diy.com/gb/en/all-about-diy
Like our videos and want to keep updated with new content? *Subscribe to our channel:* youtube.com/@BoschDIYpowertoolsUK/featured
We regularly update our social channels with all the latest DIY tips and trends for home and garden projects. Get inspired and *follow us today:*
*Facebook:* facebook.com/BoschDIYpowertoolsUK
*Instagram:* instagram.com/boschdiyandgarden/?hl=en
*Pinterest:* pinterest.co.uk/BoschDIYandGardenUK
