Uploaded October 2016 | Updated September 2026, 2 weeks ago

---

DIY install of the Leviton VRS15-1LZ vizia RF In-Wall Smart Switch. This zwave wall switch is an elegant addition to your smart home automation project and it connects easily to your Wink Hub or SmartThings controller. The video includes DIY installation instructions to make do it yourself installation easy.

Purchase Links for Products in Video
Leviton VRS15-1LZ Vizia Z-wave Switch: amzn.to/2dzHxuL
Wink Hub: amzn.to/2dzJPKf
Fluke Volt Tester: amzn.to/2cJiHHp
TEKTON Precision Screwdriver Set: amzn.to/2dAic3F

Discount Domain Names: bit.ly/2m7zuEd

No BS Web Hosting - No Contracts: bit.ly/2m7zuEd

Wire Codes on the Leviton Switch
WH = White – Neutral Wire
BK = Black – Line Wire
RD = Black or Red – Load Wire
GN = Green or Copper – Ground Wire

The Leviton In Wall smart switch does not come with a neutral pigtail, so you will need to have extra 14 gauge white wire on hand. The may also be true for the ground wire.

Not all electrical wiring is compatible with this installation. In some cases, your house may be wired to an older standard, or, your house was wired improperly. If you do not have a white neutral wire in the switch box, this video will not help you. In certain cases, your existing 3 way switch may not have a traveler wire.


Website: azhb.com
Facebook: facebook.com/diysmarthomeguy
Twitter: twitter.com/diysmarthomeguy

Copyright: John Stone 2016
DIY Smart Home Guy is a trademark of John Stone and AZHB.com