Uploaded October 2023 | Updated September 2026, 2 weeks ago

---

Print and assemble this DIY Exhaust Fan to use on any FDM or Resin version of the Wham Bam HotBox 3d printer enclosure: whambam3d.com/collections/hotbox

Download the DIY Fume Vent parts and plans here:
cults3d.com/en/3d-model/tool/wham-bam-exhaust-fan-for-resin-hotbox

See the assembled vent in action:
youtube.com/shorts/Y7EfR03LD7w

You will need these printable parts:
° Front_housing.stl
° Back_housing.stl
° Washer.stl
° LockNut.stl

As well as these purchased parts:
° 4 pcs M3 x 24 screws amazon.com/DYWISHKEY-Pieces-Stainless-Socket-Screws/dp/B07VT11DFM
° 2 pcs M3 x 6 screws or small wood screws to attach front housing to Back Housing
° 1 pc 12V 60x60x25 fan amazon.com/gp/product/B07K2Y9XSH
° 1pc variable 12V DC transformer: amazon.com/UTUO-Variable-Adjustable-transformer-brightness/dp/B08MZZPB53
° 1pc Vacuum hose and attachment set: amazon.com/gp/product/B01JROABYY
° Heat shrink wire connectors: amazon.com/dp/B07C3NBTJ9

3D PRINTING SETTINGS:
-Layer Height 0.2
-Supports from bed
-Orientation for housing part open side on the bed


Where to find us online:
WhamBamSystems.com
facebook.com/WhamBamSystems
twitter.com/whambamsystems
instagram.com/whambamsystems
linkedin.com/company/35445851
tiktok.com/@whambamsystems
reddit.com/user/WhamBamSystems


Kick Shock by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0
Source: incompetech.com/music/royalty-free/index.html?isrc=USUAN1100523
Artist: incompetech.com