DIY Flowy Sleeve UP-Cycled @HandmadebyYingwithDonna
DIY Flowy Sleeve UP-Cycled  @HandmadebyYingwithDonna
Uploaded July 2026 | Updated November 2026, 3 hours ago
Monday July 6th at 7PM EST
DOY Flowy Sleeve Up-Cycled.
No Pattern Needed Beginner Friendly
@HandmadebyYingwithDonna

All Information you need
T Shirts
Flowy fabric 1 yard
Rotary cutter
Long ruler 6x24 in is perfect
Large cutting mat
Snips
Clips

Make sure to iron t shirt

Good drape flowy fabric such as Rayon Challis

Step 1
T shirt Prep
Grab at shoulders and line up ensuring seams match up from shoulders down the sides

Step 2
Get as close to the shoulders edge as close as possible
Match from and back taking your time
Make sure they are lined up on cutting mat

Step 3
Grab ruler and mine up feeling at the shoulders edge then cut make sure to have weight on ruler to prevent slippages
Repeat on other side

Step 4
Check the length preserving the trim line cut off the straight

Step 5
Grab your fabric
Fold in half making sure top and bottom line up straight
Before cutting

Step 6
The length will depend on your personal preference

Make sure to cut end straight you can style these shirts any way you wish

This fabric will fray so less handling is best

Measure down 16 inches
1st cut and repeat again for send cut now you have both of your sleeves

Step 7
Find your center point on fabric add clip it might have stretch so be easy
Do same on 2nd sleeve

Step 8
Put right sides together T-shirt on bottom facing up flowy fabric face down
Clip down entire side for both sleeves

Step 9
Set up Surger or plan to do French seams
Time to sew đŸ§”

Step 10
Go over settings

Step 11
You will have flowy fabric on bottom t shirt on top
This will help you to line up with ease
Go about 4 inches and check on the inside to make sure threat is. It showing if it is do tension
Now finish the side and repeat on next side

Step 12
Head back to cutting mat and make sure bottom lines up
Adjustments might be needed so you might have to cut to mine up

Step 13
Go back to the sewing machine and top stitch the seam pushing the seams to the right 80/12 needle stich length set at 3
Top stitching slowly on the rayon fabric line the presser foot to seam to give a nice 1/4 in
Repeat on other side

Step 14
Hem
Trim off the fluffy stuff if you have it so you don’t have bulk
Line up on heat ruler and roll up 1 inch
Place a clip all the way across ( the think hem makes it look nicer ) personal preference here
Press and roll up another 1 inch for a total of 2 inches

Step 15
Sew down to complete the bottom hem if you can do a triple stitch if not go back and do a second stitch. Both work great 3/4 in seam guide here

Step 16
Hem up the sleeve you will do exactly the same steps as the bottom repeat for total of 2 inches remember clip clip clip
Sew the same way you did in step 15

Step 17
Final step you have made it yea you
Let’s measure the sides
Lay your shirt flat
Line up the edges and clip
Measure 10 inches from the top make it and clip where you will sew
Flip and repeat same step as before
As you can see you will be sewing on the outside of the shirt here this step is a personal preference only
I like it this way :)

Happy creative sewing friends see you in the next fun video

Blessings,
Donna L Struntz
DIY Flowy Sleeve UP-CycledBinding you say??? We have you coveredLets catch up and see about the next project on deckWhen A Quilt Project Goes SouthScraps GALORE #sewing #longarmquiltingDIY ~ Chop ~ cut ~ Repeat #NationaljellyrolldayART EAST - #arteastquiltingcoHandmade by Ying with Donna is live!QUILT OF VALOR CHALLENGEBargello ChevronMoonlight Star Block - #tulapinkPet scarves MADE easy
Handmade by Ying with Donna |

DIY Flowy Sleeve UP-Cycled

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER