Nerdforge | DIY Desktop Mini Fridge (5°C!!) @Nerdforge | Uploaded August 2017 | Updated October 2024, 9 hours ago.
Making a DIY mini fridge for a desktop or camper van at a low cost!
Vlogs? Check out Patreon: patreon.com/nerdforge
Links to products in the description.

TAKE CARE when dealing with electronics, especially mains power. Make sure you know what you are doing, or consult an expert. If the AC power plugs connects with the aluminium foil or anything else that conducts power, it may be lethal if touched.

SCHEMATIC: bit.ly/fridgeschematic

WRITTEN GUIDE: bit.ly/mini-desktop-fridge

KIT: kit.com/NaturalNerd/mini-fridge-diy-kit

PARTS USED:
- 2x electronic refrigeration modules: bit.ly/2CTj7sv
- Thermostat: bit.ly/2x4s9MT
- AC to DC power supply (12v, 15amps): bit.ly/2x30XyN
- Cold white LED strip: bit.ly/2CJ3CDn
- Wire terminals: bit.ly/2oVDeME
- Shrink tubes: bit.ly/2O6sdmG
- Power plug AC: bit.ly/2CHuhAm
- Power plug 12v: bit.ly/2QnCpcb
- Momentary push button: bit.ly/2CDAbm1
- Aluminium channel holder: bit.ly/2Mls4do
- Aluminium tape: bit.ly/2CHutj4
- Self-adhesive rubber seal: bit.ly/2Qldg1r
- White sticker paper
- Acrylic glass
- MDF
- Styrofoam
- Doorknobs (used as legs)
- Aluminium handlebar (on lid)
- Aluminium angles
- Spray paint + clear coat

TOOLS:
- Styro slicer: youtube.com/watch?v=N2n_EbRzZ0g
- Plastic scoring knife: bit.ly/scoringknife
- Hot glue gun: bit.ly/2x0vNZ6
- Soldering iron: bit.ly/2QimMm1
- Utility knife: bit.ly/2NA5D8S
- X-acto knife: bit.ly/2CInOVJ
- Heat gun: bit.ly/2Nvs4wa
- Hacksaw
- Crimping tool
- Drill
- Dremel
- Silhouette Cameo 3
- Multibond Rapid Glue
- Caulking gun

FOLLOW:
Website - thenerdforge.com
Facebook - facebook.com/Nerdforge
Instagram - instagram.com/thenerdforge
Twitter - twitter.com/TheNerdforge
BUSINESS CONTACT: contact@thenerdforge.com