Mr Innovative | DIY CAM Profile plotter machine | Arduino based project | Prototype @MrInnovative | Uploaded December 2022 | Updated October 2024, 1 minute ago.
PCBA from $0（Free Setup,Free Stencil),Get Coupons Here:jlcpcb.com/IYB

Hello friends this time I have build a CAM profile plotter machine prototype.
I have 3D printed some different CAM design and used this machine I plot its CAM profile.

Basically CAM profile is :
The basic geometry of a cam profile consists of three arcs that outline the dwell–rise–return–dwell (D-R-R-D) periods in a cam rotation cycle

CAM profile is very crucial in machine designing, different types of reciprocating motion can achive by using different types of CAM.

I have used two stepper motor for this project one rotate CAM upto desired angle one slide the paper below the pen.
One end of pre-tension horizontal arm slides over the circumference of the CAM and other end plot the profile on the Paper.
I have used stepper motor just because precise rotation.

PCB used in this project
oshwlab.com/sharmaz747/multipurpose-pcb_copy_copy_copy

💻visit for more projects :-
👉 instagram.com/mrinnovative01
👉 electricdiylab.com
👉 FB page :- facebook.com/InnovativeMr

I use Epidamic sound for my back ground music if you like it you can check them out

epidemicsound.com/referral/vbps08


This video is made for educational purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects +91 7600079068