Uploaded September 2016 | Updated September 2026, 1 day ago
DIY Caboodle Handle Part 2 (HD)
This is how I made my handle for the caboodle. Thanks for watching!
Caboodle Video Link: youtu.be/ek9qS0wGkjI
Steps
1.) Using my scissors I cut a piece of thick plastic.
2.) I then folded it to the width I wanted and hot glued it.
3.) I folded it about 3 times. Hot gluing between each fold. Then cut off the excess.
4.) I took some black contact paper and cover the plastic. cut off the excess.
5.) Using binder clips I folded the ends and clipped them to create a crease.
6.) After about 15 minutes you can take them off and continue.
7.) Using a glue gun I glued two pieces of ribbon to the handle.
8.) Then glue one long piece of ribbon straight down the middle tucking the ends under the other ribbon.
9.) Using the handle as a guide, I cut two pieces of cardboard leaving about a centimeter extra on three sides to fold over.
10.) I used a pen and ruler to score the cardboard.
11.) Once that's done I spray painted it with a metallic chrome color and let that dry.
12.) I then used a silver glitter glue to cover the cardboard pieces. It wasn't enough so I covered it with more sliver glitter. Let that dry.
13.) I then sprayed them with a glitter sealer and let that dry.
14.) While that dried, using thumb tacks, I attached the handle to the lid.
15.) I then hot glued the two pieces onto the handle ends and that's it.
What I Used:
1.) Thick Piece Of Plastic
2.) Black Contact Paper walmart.com/ip/33753894?wmlspartner=wlpa&adid=22222222227022269582&wl0=&wl1=g&wl2=c&wl3=40876426232&wl4=pla-78767193032&wl5=9001696&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=33753894&wl13=&veh=sem
3.) Glue Gun
4.) Ribbon michaels.com/celebrate-it-360-glitter-strip-grosgrain-ribbon-6yd/M10216252.html?dwvar_M10216252_color=Pink#q=pink+ribbion&pmpt=qualifying&sz=24&start=28
5.) Cardboard
6.) Thumb Tacks
7.)Horizon Silver Glitter Glue 1.8oz
8.) Silver glitter
9.) Krylon Sealer Glitter Blast 8oz
10.) Scissors
11.) Ruler
12.) Pen
13.) Krylon Premium Metallic Original Chrome Spray Paint
A tiny bit about myself:
Hi, my name is Ivelisse. I've been artistic and creative my whole life. Unfortunately, it wasn't an easy one. I'm a survivor of many trials and tribulations. It caused me to develop serious mental health issues. I was self-medicating by using drugs and alcohol for over twenty years. On August 1st, 2014, I threw myself at the mercy of the Lord and prayed to God to save me. I asked God to forgive me for all my sins, and I forgave everyone who ever hurt me. I've been sober and clean ever since. Glory be to God! I started my walk with Christ along with my health and fitness Journey, and soon after, I found myself itching to get back to my passion, my art! But: I didn't just want to do it for myself. I wanted to share what God blessed me with and did for me and the joy He brings me to others. Not long after, I created my YouTube channel, DIY No Need To Cry! I took the bottles that were killing me and turned them into art. With each piece I make, I replace a bad memory and create new ones with all of you! Welcome to the crafty fam! God bless you all!
Business Email:
diynoneedtocry@yahoo.com
My Instagram: instagram.com/diynoneedtocry
My Twitter:
twitter.com/DIYNoNeedToCry
My Facebook:
facebook.com/DIY-No-Need-To-Cry-563516063850901
***NO PERSON OR PARTY HAS PERMISSION TO DOWNLOAD THIS VIDEO, AND RE-UPLOAD IT IN A COMPLETE OR ALTERED STATE****
DIY Caboodle Handle Part 2 (HD)
This is how I made my handle for the caboodle. Thanks for watching!
Caboodle Video Link: youtu.be/ek9qS0wGkjI
Steps
1.) Using my scissors I cut a piece of thick plastic.
2.) I then folded it to the width I wanted and hot glued it.
3.) I folded it about 3 times. Hot gluing between each fold. Then cut off the excess.
4.) I took some black contact paper and cover the plastic. cut off the excess.
5.) Using binder clips I folded the ends and clipped them to create a crease.
6.) After about 15 minutes you can take them off and continue.
7.) Using a glue gun I glued two pieces of ribbon to the handle.
8.) Then glue one long piece of ribbon straight down the middle tucking the ends under the other ribbon.
9.) Using the handle as a guide, I cut two pieces of cardboard leaving about a centimeter extra on three sides to fold over.
10.) I used a pen and ruler to score the cardboard.
11.) Once that's done I spray painted it with a metallic chrome color and let that dry.
12.) I then used a silver glitter glue to cover the cardboard pieces. It wasn't enough so I covered it with more sliver glitter. Let that dry.
13.) I then sprayed them with a glitter sealer and let that dry.
14.) While that dried, using thumb tacks, I attached the handle to the lid.
15.) I then hot glued the two pieces onto the handle ends and that's it.
What I Used:
1.) Thick Piece Of Plastic
2.) Black Contact Paper walmart.com/ip/33753894?wmlspartner=wlpa&adid=22222222227022269582&wl0=&wl1=g&wl2=c&wl3=40876426232&wl4=pla-78767193032&wl5=9001696&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=33753894&wl13=&veh=sem
3.) Glue Gun
4.) Ribbon michaels.com/celebrate-it-360-glitter-strip-grosgrain-ribbon-6yd/M10216252.html?dwvar_M10216252_color=Pink#q=pink+ribbion&pmpt=qualifying&sz=24&start=28
5.) Cardboard
6.) Thumb Tacks
7.)Horizon Silver Glitter Glue 1.8oz
8.) Silver glitter
9.) Krylon Sealer Glitter Blast 8oz
10.) Scissors
11.) Ruler
12.) Pen
13.) Krylon Premium Metallic Original Chrome Spray Paint
A tiny bit about myself:
Hi, my name is Ivelisse. I've been artistic and creative my whole life. Unfortunately, it wasn't an easy one. I'm a survivor of many trials and tribulations. It caused me to develop serious mental health issues. I was self-medicating by using drugs and alcohol for over twenty years. On August 1st, 2014, I threw myself at the mercy of the Lord and prayed to God to save me. I asked God to forgive me for all my sins, and I forgave everyone who ever hurt me. I've been sober and clean ever since. Glory be to God! I started my walk with Christ along with my health and fitness Journey, and soon after, I found myself itching to get back to my passion, my art! But: I didn't just want to do it for myself. I wanted to share what God blessed me with and did for me and the joy He brings me to others. Not long after, I created my YouTube channel, DIY No Need To Cry! I took the bottles that were killing me and turned them into art. With each piece I make, I replace a bad memory and create new ones with all of you! Welcome to the crafty fam! God bless you all!
Business Email:
diynoneedtocry@yahoo.com
My Instagram: instagram.com/diynoneedtocry
My Twitter:
twitter.com/DIYNoNeedToCry
My Facebook:
facebook.com/DIY-No-Need-To-Cry-563516063850901
***NO PERSON OR PARTY HAS PERMISSION TO DOWNLOAD THIS VIDEO, AND RE-UPLOAD IT IN A COMPLETE OR ALTERED STATE****
