DIY - Branding Iron - Making It Yourself @danthemakerman
DIY - Branding Iron - Making It Yourself  @danthemakerman
Uploaded May 2016 | Updated November 2026, 11 hours ago
Music: Navajo Night by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Artist: audionautix.com

I was inspired by John Zhu’s video (youtube.com/watch?v=Qj3oeknswio) were he carves a branding iron with his logo on it, on to a piece of round bar stock. If you aren’t familiar with his YouTube channel I highly suggest you check it out. He does a great job of explaining his process and his projects. Pretty much all of his project builds have stories behind them which he articulates very well. I attempted to use the same method he used but I was not successful the rotary tool I was using just didn’t have enough power to make the cuts. Or the steel I chose was just to hard. So I regrouped and made a branding iron using the method in my video. I didn’t do any research on this style of branding iron I just made it up as I went along. In this video I also do some welding, which I am very inexperienced with, but I gave it a shot and I try to learn as I go. One of the issues that I had was that the letters ended up sitting proud of the square frame that surrounds them so the square frame doesn’t get burned onto the material. Only the letters get burned in. I’m not sure why this happened but I am attributing it to my poor welding skills. I think the splatter ended up mucking up the letter placement but that’s just a guess. When I mocked up the pieces everything was sitting flush and level so not sure what happened. I could sand it down to where it sits flush but I’m afraid to remove that much material from the already thin letters. Other than that it came out okay. I will definitely use it because well its an excuse to play with fire and use a branding iron:) I hope you enjoy the video and as always thanks for watching.
DIY - Branding Iron - Making It YourselfModern Tanto Inspired by Koss You Tube ChannelSilver Surfer Comic Book Corner Art Box #comicbook #marvel #fanart #silversurfer #laserengraverHow I Make my Comic Book Superhero Templates - Inkscape TutorialRustic Shelf with Hammer Head HooksIncredible Hulk #340 laser engraving project.  #comicbook #marvel #hulk #wolverineHow to Make Rebar Legs -  $35 BenchIncredible Hulk Cover made with a laser engraved/cutter. #marvel #comicbook #greyhulk #hulkMarking Knife from a Saw BladeEiffel Tower Wall Art - Limited Tools - Making It YourselfMaking a Miniature Shipping Crate & CrowbarUltimate Batman Night Light - Making It Yourself
Daniel Quiroz |

DIY - Branding Iron - Making It Yourself

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER