Robert Cowan | DIY Bandsaw Table (for horizontal metal-cutting bandsaw) @RobertCowanDIY | Uploaded 1 year ago | Updated 9 minutes ago
The vertical table for my horizontal metal-cutting bandsaw is awful and needed to be replaced with something better. I had some leftover aluminum from a previous project, so I decided to make my own. In this video I show how I machined a new table. My bandsaw is a Harbor Freight 7x12 with hydraulic feed. This is most likely very similar to the model sold by Grizzle, Enco, Jet and others.

Bosch Palm Router - amzn.to/3vJHTn8

My Favorite Tools - amazon.com/hz/wishlist/ls/26XWKXQK322W8?&tag=robertcowandi-20

00:00 Intro
00:37 Old Bandsaw Table
02:28 The Design Process
03:14 CAD Model
05:09 CAM and Toolpaths
08:44 MDF Prototype
09:49 Prototype Test Fit
11:36 Mounting Point
12:52 Material Setup
14:21 First Cuts
15:43 Miter Slot
16:57 Blade Pocket
17:17 Surface Finish
17:49 Clearance Tests
18:47 Underside Mounting Pocket
19:40 Blade Slot
20:48 Test Mounting
21:27 Breaking Edges
21:49 Sanding and Prepping for Paint
22:24 Painting
23:15 Final Finish
23:55 Final Mounting
24:44 Conclusion