Uploaded April 2020 | Updated September 2026, 2 weeks ago
3D printing parts that are more complex than what we usually make can be daunting - especially when it also needs to look good! Making my own 5.1 surround satellite speakers was a project I started over two years ago and today we're finally finishing it. There were plenty of hiccups and mistakes - I'll show you all of them so that you don't have to make them yourself!
The speakers were modeled with Onshape, unfortunately, I don't have the models anymore or I'd gladly share them with you.
Materials used:
Front: Visaton FR10 + SC5
Rear: Visaton FR10HM
PLA filament from Matterhackers, Fillamentum, DAS FILAMENT and Atom 3D
Printed on the Atom 2.5 EX
T-Shirt from Proto-Pasta
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
Read the article to this video here: toms3d.org/2020/04/09/surround_speakers
🩵 Support the channel by shopping through my affiliate links
Buy Bambu Lab printers and printer accessories go.toms3d.org/Bambu
Buy Prusa Research printers and printer accessories go.toms3d.org/prusa
Tools I use:
🔩 Onshape Cloud-native CAD (free for Makers) https://onshape.pro/ThomasSanladerer
🎵 Epidemic Sound for video music (30-day trial) share.epidemicsound.com/MadeWithLayers
📷 Camera gear and recording equipment (not free, unfortunately) toms3d.org/my-gear
🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
3D printing parts that are more complex than what we usually make can be daunting - especially when it also needs to look good! Making my own 5.1 surround satellite speakers was a project I started over two years ago and today we're finally finishing it. There were plenty of hiccups and mistakes - I'll show you all of them so that you don't have to make them yourself!
The speakers were modeled with Onshape, unfortunately, I don't have the models anymore or I'd gladly share them with you.
Materials used:
Front: Visaton FR10 + SC5
Rear: Visaton FR10HM
PLA filament from Matterhackers, Fillamentum, DAS FILAMENT and Atom 3D
Printed on the Atom 2.5 EX
T-Shirt from Proto-Pasta
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
Read the article to this video here: toms3d.org/2020/04/09/surround_speakers
🩵 Support the channel by shopping through my affiliate links
Buy Bambu Lab printers and printer accessories go.toms3d.org/Bambu
Buy Prusa Research printers and printer accessories go.toms3d.org/prusa
Tools I use:
🔩 Onshape Cloud-native CAD (free for Makers) https://onshape.pro/ThomasSanladerer
🎵 Epidemic Sound for video music (30-day trial) share.epidemicsound.com/MadeWithLayers
📷 Camera gear and recording equipment (not free, unfortunately) toms3d.org/my-gear
🎧 Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
👐 Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
