FarmCraft101 | DIY 20-inch Disc Sander Build. $2000 Tool, Cheap and Easy. @FarmCraft101 | Uploaded August 2021 | Updated October 2024, 3 hours ago.
I make a disc sander attachment for my wood lathe using the faceplate I made in a previous video. There are many different ways this could be done. I chose MDF because it is flat, cheap and stable. And because I had some laying around... ;-) I put 2 coats of polyurethane on it, balanced it, and then stuck the paper on with excellent results. If you need a large disc sander and have a lathe, I highly recommend this mod.
Sanding discs:
amzn.to/3Cn0hog
My lathe:
amzn.to/3fDL73Z
MERCH STORE!:
farmcraft101.com
Facebook:
facebook.com/FarmCraft101
Patreon:
patreon.com/FarmCraft101
Buy me a coffee- or a beer!
buymeacoffee.com/farmcraft101
I make a disc sander attachment for my wood lathe using the faceplate I made in a previous video. There are many different ways this could be done. I chose MDF because it is flat, cheap and stable. And because I had some laying around... ;-) I put 2 coats of polyurethane on it, balanced it, and then stuck the paper on with excellent results. If you need a large disc sander and have a lathe, I highly recommend this mod.
Sanding discs:
amzn.to/3Cn0hog
My lathe:
amzn.to/3fDL73Z
MERCH STORE!:
farmcraft101.com
Facebook:
facebook.com/FarmCraft101
Patreon:
patreon.com/FarmCraft101
Buy me a coffee- or a beer!
buymeacoffee.com/farmcraft101