Team Just Cuz Robotics | Division (3lb) All Fights at Norwalk Havoc 11/21/2020 (Fights Only) @JustCuzRobotics | Uploaded 3 years ago | Updated 5 hours ago
FIGHTS ONLY CUT - FULL EVENT REPORT IS HERE: youtu.be/v3DsimuXlX4
Check out the full stream and event info:
youtube.com/channel/UChgAZxOWR0S3Q376oAodGjQ
Norwalk Havoc Website, if you want to find out more or register to compete: 50day.io
Norwalk had an absolutely brutal field of 51 three-pound Beetleweight robots this time around. While Division ended up not winning quite as many fights as I'd hoped, and a lot of the things that worked in my testing failed during fights, I still see some real potential with the design, and I believe I can get it where I want it to go. The robots I fought this time hit way harder than many I have fought in the past, and the fully custom gearbox drivetrain was able to survive the worst of it without failing even once. For reasons I'll get into in the full report, I was unfortunately unable to use Mini Mulcher this time around, but don't worry, this isn't the last you'll see of either bot!
0:00 Voxel
1:24 Sea Devil
5:16 Drum Go Dum
8:48 Nitro Hornet
#CombatRobotics #Beetleweight
Just 'Cuz Store:
http://bit.ly/JustCuzStore
Instagram: @JustCuzRobotics
instagram.com/justcuzrobotics
@bloodsport_battlebot
instagram.com/bloodsport_battlebot
Bloodsport Facebook Page:
facebook.com/bnsrobotics
FIGHTS ONLY CUT - FULL EVENT REPORT IS HERE: youtu.be/v3DsimuXlX4
Check out the full stream and event info:
youtube.com/channel/UChgAZxOWR0S3Q376oAodGjQ
Norwalk Havoc Website, if you want to find out more or register to compete: 50day.io
Norwalk had an absolutely brutal field of 51 three-pound Beetleweight robots this time around. While Division ended up not winning quite as many fights as I'd hoped, and a lot of the things that worked in my testing failed during fights, I still see some real potential with the design, and I believe I can get it where I want it to go. The robots I fought this time hit way harder than many I have fought in the past, and the fully custom gearbox drivetrain was able to survive the worst of it without failing even once. For reasons I'll get into in the full report, I was unfortunately unable to use Mini Mulcher this time around, but don't worry, this isn't the last you'll see of either bot!
0:00 Voxel
1:24 Sea Devil
5:16 Drum Go Dum
8:48 Nitro Hornet
#CombatRobotics #Beetleweight
Just 'Cuz Store:
http://bit.ly/JustCuzStore
Instagram: @JustCuzRobotics
instagram.com/justcuzrobotics
@bloodsport_battlebot
instagram.com/bloodsport_battlebot
Bloodsport Facebook Page:
facebook.com/bnsrobotics
![Cost of Combat Robotics - Getting Started Building Smaller Robots [Livestream Edit]](https://i.ytimg.com/vi/G_esLsr6mu4/hqdefault.jpg "Cost of Combat Robotics - Getting Started Building Smaller Robots [Livestream Edit]
Combat Robotics is more than just Battlebots! Ever wondered how much the smaller robots in the more affordable weight classes cost to build? How expensive it is to actually make your own combat robots and join in on the fun? Well, I sent a survey out to builders from around the globe to find out!
Just Cuz Robotics Website: https://justcuzrobotics.com/
Just Cuz Store: https://justcuzrobotics.com/shop
Try PCBWays CNC Machining or PCB Fab using this link for a $5 new user credit: https://bit.ly/PCBWayJustCuz
Instagram: @JustCuzRobotics
https://www.instagram.com/justcuzrobotics/
@bloodsport_battlebot
https://www.instagram.com/bloodsport_battlebot
@retrograde_battlebot
https://www.instagram.com/retrograde_battlebot/
Bloodsport/BnS Facebook Page:
https://www.facebook.com/bnsrobotics/
Music by Streambeats
Combat Bot Drivetrain Design: https://www.youtube.com/watch?v=1tLl_Wm6snk&
Failsafes and Arming: https://www.youtube.com/watch?v=arJ6qlzS2fU&
Beater Bar Design vid: https://www.youtube.com/watch?v=O5lrjSQp8eA&
Great Fabrication sources:
Anything 2D: https://sendcutsend.com/
3D CNC: https://bit.ly/PCBWayJustCuz
3D Printing: https://justcuzrobotics.com/3d-print-service
Note: Some of these are Amazon Affiliate links
Transmitters:
FS i6 Radio https://amzn.to/3IqICxs
QX7 Radio https://amzn.to/3tkG1RA
Radiomaster TX12 https://amzn.to/36zvtoR
Radiomaster TX16S https://amzn.to/36vLTyg
3D Printers:
Ender 3 Pro ($220-250 kit) https://amzn.to/3wDnTVh
Ender 3 V2 ($270-300 assembled) https://amzn.to/3ikXqDn
Sidewinder X2 ($470-500 assembled) https://amzn.to/3to0DZ5
Prusa Mini+ ($350 kit, $400 assembled) https://www.prusa3d.com/category/original-prusa-mini/
Prusa Mk3S+ ($750 kit, $1000 assembled) https://www.prusa3d.com/category/original-prusa-i3-mk3s/
Other:
My dual LiPo charger https://amzn.to/3JpBfHX
Good cheaper charger https://amzn.to/3JtKEP0
TS100 Soldering Iron https://amzn.to/3Iik8Xm
Pinecil soldering iron: https://amzn.to/3wlQgqv
Chapters:
00:00:00 Intro
00:00:33 Presentation Start
00:01:21 Barriers to Entry
00:01:54 Data Collection
00:03:34 Statistics
00:05:33 Data Caveats
00:07:06 About Sponsors
00:07:50 The Numbers!
00:08:23 Major Takeaways
00:10:01 Tools People Use
00:12:19 How Competitors Travel
00:14:13 Beetleweights 3lb - Cost
00:16:49 Antweights 1lb - Cost
00:18:38 Is a 3D printer Worth It?
00:19:05 Fairyweight 150g - Cost
00:20:44 12lb and 30lb - Cost
00:22:48 How to reduce costs?
00:23:29 3D Printers
00:26:08 Dont Cheap Out
00:27:51 Expect Failures
00:28:33 Outsourcing
00:29:23 Q&A - Surprising Entries
00:29:37 Cheapest Bots
00:30:16 Most Expensive Bots
00:31:16 Simple Ways to Start (Shameless Plug)
00:31:34 DartBox Gearmotors for sale now!
00:33:31 Calculations for Drive
00:34:03 Other Tutorials
00:35:07 Outro
#CombatRobotics #beetleweight #antweight")
![Division V3: Fire Fighting? Norwalk Havoc April 2022 Recap (3lb Beetleweight Combat Bot) [Part 1]](https://i.ytimg.com/vi/HaUE3IxY-tc/hqdefault.jpg "Division V3: Fire Fighting? Norwalk Havoc April 2022 Recap (3lb Beetleweight Combat Bot) [Part 1]
Division finally had a redemption arc in the April 2022 Norwalk Havoc event!
Thanks to PCBWay for providing the CNC machined chassis and PCB running in this bot! Check them out: https://bit.ly/PCBWayJustCuz
Watch as Division fights some of the best of the best in the tournament.
Purchase the CAD and view the Bill of Materials for Division V3.1 here: https://bit.ly/DivV31CAD
Watch Part 2 Now! https://youtu.be/mPv4VpOCP58
Just Cuz Robotics Website: https://justcuzrobotics.com/
Just Cuz Store: https://justcuzrobotics.com/shop
Try PCBWays CNC Machining or PCB Fab using this link for a $5 new user credit: https://bit.ly/PCBWayJustCuz
Instagram: @JustCuzRobotics
https://www.instagram.com/justcuzrobotics/
@bloodsport_battlebot
https://www.instagram.com/bloodsport_battlebot
@retrograde_battlebot
https://www.instagram.com/retrograde_battlebot/
Bloodsport/BnS Facebook Page:
https://www.facebook.com/bnsrobotics/
Music by Karl Casey @ White Bat Audio
#CombatRobotics #Beetleweight
Chapters
00:00:00 Cold Open
00:00:43 Intro
00:01:54 Fight 1
00:03:42 Fight 1 Commentary
00:04:38 Fight 1 Damage
00:05:06 Fight 1 Interview
00:06:08 Fight 2
00:08:35 Stream Interview Fight 2
00:09:45 Fight 2 Commentary
00:10:56 Fight 2 Interview
00:12:17 Damage from Fight 2
00:13:39 Repairs!
00:15:27 Fight 3 Opponent & Setup
00:16:54 Fight 3
00:20:09 Fight 3 Slomo and Commentary
00:22:26 Fight 3 Interview
00:23:32 Buy CAD for Division!
00:25:25 Whats Next")
