Uploaded May 2024 | Updated November 2026, 3 hours ago
455nm laser technology is very limited in the materials it can naturally damage. There are all sorts of "tricks" that people have discovered to act as energy transfer agents, carbon black (soot) is one such material that I have briefly experimented with to encourage an engraving effect on glass. My goal in this series is to understand what natural attributes this technology offers and how to best exploit them.
One such major asset is the almost instant power switching available from a diode driven by PWM. For normal engraving or cutting the %power sits at a fixed value and the speed is constant. All the controller has to do is switch the laser on and off. However, there is a mode of operation that turns this laser from a saint into a hooligan. Select GRAYSCALE and you enter a new world. The amazing power switching speed allows the controller to send a DIFFERNT %power for EVERY pixel in an image. This seems to offer a method of reproducing photo images onto a material that has a tonal scorching palette, such as wood or card. My analysis and demonstrations of the focused laser beam properties show that it is unsuitable for such an application because changing the %power changes exposure time and depth of cut , not colour. Yes, there are "tricks" that can create the impression of analog tonal change to cellulose based products but these usually involve chemical infusion. HOWEVER...changing depth of cut for every pixel offers great NATURAL capability for 3D engraving , provided we choose a suitable material and select a speccial DEPTH bitmap image to work with.
455nm laser technology is very limited in the materials it can naturally damage. There are all sorts of "tricks" that people have discovered to act as energy transfer agents, carbon black (soot) is one such material that I have briefly experimented with to encourage an engraving effect on glass. My goal in this series is to understand what natural attributes this technology offers and how to best exploit them.
One such major asset is the almost instant power switching available from a diode driven by PWM. For normal engraving or cutting the %power sits at a fixed value and the speed is constant. All the controller has to do is switch the laser on and off. However, there is a mode of operation that turns this laser from a saint into a hooligan. Select GRAYSCALE and you enter a new world. The amazing power switching speed allows the controller to send a DIFFERNT %power for EVERY pixel in an image. This seems to offer a method of reproducing photo images onto a material that has a tonal scorching palette, such as wood or card. My analysis and demonstrations of the focused laser beam properties show that it is unsuitable for such an application because changing the %power changes exposure time and depth of cut , not colour. Yes, there are "tricks" that can create the impression of analog tonal change to cellulose based products but these usually involve chemical infusion. HOWEVER...changing depth of cut for every pixel offers great NATURAL capability for 3D engraving , provided we choose a suitable material and select a speccial DEPTH bitmap image to work with.










