Uploaded April 2024 | Updated November 2026, 3 hours ago
DINGS' Electric Gripper and Force Control Stepper Motion Controller
Jiangsu DINGS’ offers high performance of stepper driven electric gripper series with force control function from DS-CLS9-FRS4-01 closed loop motion controller.
DINGS’ designs and develops electric gripper based on premium level of DINGS’ External stepper lead screw linear actuator and it has NEMA8 (20mm), NEMA11 (28mm) options for two fingers and NEMA14 (35mm), NEMA17 (42mm) options for three fingers.
NEMA8 (20mm) gripper offers 6mm stroke with 7 different lead screw selections.
NEMA11 (28mm) gripper offers 6mm and 12mm stroke with 6 different lead screw selections.
It depends on selection of lead screw pitch and NEMA8 (20mm) gripper generates max. 32N (recommendable 16N) of gripping force and NEMA11 (28mm) gripper generates max. 118N (recommendable 59N) of gripping force.
Grippers are widely used in application requires force control and DS-CLS9-FRS4-01, Modbus RTU based closed loop stepper motion controller provides user friendly force control function.
By using specific User Interface Program and adjust torque ratio by percentage between 0~100%, user adjust and tune up torque ratio by few clicks.
Surely DINGS’ also provides high resolution of optical/incremental encoders with various resolution selections.
For more information, please visit dingsmotion.com or contact daniel@dingsmotion.com
딩스 전동 그리퍼 및 힘제어 기능 드라이브 솔루션
딩스의 고성능 스텝 모터 구동 기반 전동 그리퍼 시리즈 및 힘 제어 기능을 탑재한 DS-CLS9-FRS4-01 폐루프 스텝 모터 제어 시스템을 소개합니다.
딩스가 자체적으로 개발한 전동 그리퍼들은 딩스의 가장 주력 제품인 External 리드 스크류 리니어 액츄에이터를 기반으로 디자인 되었으며 20mm 및 28mm 스텝 모터 기반의 2-Finger 그리퍼 시스템과
35mm 및 42mm 스텝 모터 기반 3-Finger 그리퍼 시스템을 판매하고 있습니다.
20mm 제품은 6mm 표준 스트로크 제품으로 총 7가지의 각기 다른 리드 스크류 피치를 선택할 수 있고, 28mm 제품은 6mm/12mm 표준 스트로크 제품으로 총 6가지의 각기 다른 리드 스크류 피치를 선택 할 수 있습니다.
어떤 리드 스크류 피치를 선택하는지에 따라 달라지지만, 20mm 그리퍼의 경우 최대 32N (권장 16N) Gripping 힘을 낼 수 있고, 28mm 그리퍼의 경우 최대 118N (권장 59N)의 Gripping 힘을 낼 수 있습니다.
그리퍼들은 일반적으로 힘 제어 기능을 필요로 하는 어플리케이션들에서 광범위하게 사용되고 있습니다.
ModBus RTU RS485 기반 폐루프 스텝 모터 제어 시스템인 DS-CLS9-FRS4-01 제품은 힘 제어 기능에 특화된 제품으로 사용자가 편리하게 기능을 사용할 수 있도록 되어 있습니다.
힘 제어 전용 GUI 프로그램을 통해 0~100%까지 각 %별로 토크 Ratio를 몇 번의 클릭으로 간편하게 설정 할 수 있으며 폐루프 스텝 모터 제어 시스템인만큼 이를 구현하기 위한 다양한 고정밀도 엔코더도
(광학식/증분식) 옵션으로 제공하고 있습니다.
구체적인 제품 정보는 www.dingsmotion.kr을 방문해 주시거나 daniel@dingsmotion.com으로 연락 주시기 바랍니다
DINGS' Electric Gripper and Force Control Stepper Motion Controller
Jiangsu DINGS’ offers high performance of stepper driven electric gripper series with force control function from DS-CLS9-FRS4-01 closed loop motion controller.
DINGS’ designs and develops electric gripper based on premium level of DINGS’ External stepper lead screw linear actuator and it has NEMA8 (20mm), NEMA11 (28mm) options for two fingers and NEMA14 (35mm), NEMA17 (42mm) options for three fingers.
NEMA8 (20mm) gripper offers 6mm stroke with 7 different lead screw selections.
NEMA11 (28mm) gripper offers 6mm and 12mm stroke with 6 different lead screw selections.
It depends on selection of lead screw pitch and NEMA8 (20mm) gripper generates max. 32N (recommendable 16N) of gripping force and NEMA11 (28mm) gripper generates max. 118N (recommendable 59N) of gripping force.
Grippers are widely used in application requires force control and DS-CLS9-FRS4-01, Modbus RTU based closed loop stepper motion controller provides user friendly force control function.
By using specific User Interface Program and adjust torque ratio by percentage between 0~100%, user adjust and tune up torque ratio by few clicks.
Surely DINGS’ also provides high resolution of optical/incremental encoders with various resolution selections.
For more information, please visit dingsmotion.com or contact daniel@dingsmotion.com
딩스 전동 그리퍼 및 힘제어 기능 드라이브 솔루션
딩스의 고성능 스텝 모터 구동 기반 전동 그리퍼 시리즈 및 힘 제어 기능을 탑재한 DS-CLS9-FRS4-01 폐루프 스텝 모터 제어 시스템을 소개합니다.
딩스가 자체적으로 개발한 전동 그리퍼들은 딩스의 가장 주력 제품인 External 리드 스크류 리니어 액츄에이터를 기반으로 디자인 되었으며 20mm 및 28mm 스텝 모터 기반의 2-Finger 그리퍼 시스템과
35mm 및 42mm 스텝 모터 기반 3-Finger 그리퍼 시스템을 판매하고 있습니다.
20mm 제품은 6mm 표준 스트로크 제품으로 총 7가지의 각기 다른 리드 스크류 피치를 선택할 수 있고, 28mm 제품은 6mm/12mm 표준 스트로크 제품으로 총 6가지의 각기 다른 리드 스크류 피치를 선택 할 수 있습니다.
어떤 리드 스크류 피치를 선택하는지에 따라 달라지지만, 20mm 그리퍼의 경우 최대 32N (권장 16N) Gripping 힘을 낼 수 있고, 28mm 그리퍼의 경우 최대 118N (권장 59N)의 Gripping 힘을 낼 수 있습니다.
그리퍼들은 일반적으로 힘 제어 기능을 필요로 하는 어플리케이션들에서 광범위하게 사용되고 있습니다.
ModBus RTU RS485 기반 폐루프 스텝 모터 제어 시스템인 DS-CLS9-FRS4-01 제품은 힘 제어 기능에 특화된 제품으로 사용자가 편리하게 기능을 사용할 수 있도록 되어 있습니다.
힘 제어 전용 GUI 프로그램을 통해 0~100%까지 각 %별로 토크 Ratio를 몇 번의 클릭으로 간편하게 설정 할 수 있으며 폐루프 스텝 모터 제어 시스템인만큼 이를 구현하기 위한 다양한 고정밀도 엔코더도
(광학식/증분식) 옵션으로 제공하고 있습니다.
구체적인 제품 정보는 www.dingsmotion.kr을 방문해 주시거나 daniel@dingsmotion.com으로 연락 주시기 바랍니다



![RM-EGB [Powered by ROBUSTMOTION] 그리퍼 시리즈 제품 소개
ROBUST MOTION사의 RM-EGB 그리퍼 제품의 기본 데모 동영상입니다. 주로 공압 그리퍼를 대체하는 어플리케이션에 적용이 가능하며 I/O 제어를 통해 이미 저장된 파라미터들에 따라 (Preset Parameters) 그리퍼 개폐를 손 쉽게 구현할 수 있습니다. 3비트로 총 8개의 I/O Mapping이 손쉽게 이루어 질 수 있어, 매우 경제적이면서도 사용이 간편한 제품입니다. 추가 정보는 daniel@dingsmotion.com으로 연락 주시거나, www.dkps.co.kr을 방문해 주시기 바랍니다. 감사합니다 RM-EGB [Powered by ROBUSTMOTION] 그리퍼 시리즈 제품 소개](https://i.ytimg.com/vi/W9H8PV7o1OQ/mqdefault.jpg)






