Uploaded October 2022 | Updated November 2026, 3 hours ago
Jiangsu DINGS’ offers high performance of stepper driven electric gripper series with force control function from DS-CLS9-FRS4-01 closed loop motion controller.
DINGS’ designs and develops electric gripper based on premium level of DINGS’ External stepper lead screw linear actuator and it has NEMA8 (20mm) and NEMA11 (28mm) options.
NEMA8 (20mm) gripper offers 6mm stroke with 7 different lead screw selections.
NEMA11 (28mm) gripper offers 6mm and 12mm stroke with 6 different lead screw selections.
It depends on selection of lead screw pitch and NEMA8 (20mm) gripper generates max. 32N (recommendable 16N) of gripping force and NEMA11 (28mm) gripper generates max. 118N (recommendable 59N) of gripping force.
Grippers are widely used in application requires force control and DS-CLS9-FRS4-01, Modbus RTU based closed loop stepper motion controller provides user friendly force control function. By using specific User Interface Program and adjust torque ratio by percentage between 0~100%, user adjust and tune up torque ratio by few clicks. Surely DINGS’ also provides high resolution of optical/incremental encoders with various resolution selections.
For more information, please visit dingsmotion.com or contact daniel@dingsmotion.com
Jiangsu DINGS’ offers high performance of stepper driven electric gripper series with force control function from DS-CLS9-FRS4-01 closed loop motion controller.
DINGS’ designs and develops electric gripper based on premium level of DINGS’ External stepper lead screw linear actuator and it has NEMA8 (20mm) and NEMA11 (28mm) options.
NEMA8 (20mm) gripper offers 6mm stroke with 7 different lead screw selections.
NEMA11 (28mm) gripper offers 6mm and 12mm stroke with 6 different lead screw selections.
It depends on selection of lead screw pitch and NEMA8 (20mm) gripper generates max. 32N (recommendable 16N) of gripping force and NEMA11 (28mm) gripper generates max. 118N (recommendable 59N) of gripping force.
Grippers are widely used in application requires force control and DS-CLS9-FRS4-01, Modbus RTU based closed loop stepper motion controller provides user friendly force control function. By using specific User Interface Program and adjust torque ratio by percentage between 0~100%, user adjust and tune up torque ratio by few clicks. Surely DINGS’ also provides high resolution of optical/incremental encoders with various resolution selections.
For more information, please visit dingsmotion.com or contact daniel@dingsmotion.com
![Myactuator [Suzhou Micro Technology] Planetary Gearbox Joint Servo Actuator RMD-X Series Scara Demo
Myactuator offers Brushless DC Motor driven Joint Servo Actuator for Robotics industry with RMD-L, RMD-H, RMD-X and EPS-RH. Standard RMD-L series are mainly direct drive motor solution and specially designed RMD-X model is planetary gear integrated solution for better performance. RMD-H series is based on outer runner frameless BLDC motor which is able to generate greater torque and also wider hollow shaft design will be very suitable to make cable thru. And EPS-RH series has harmonic gear because of high rigidity of application for example cooperative robot. Those joint actuators support various options such as standard, hollow shaft, controller integrated. Also not only primary encoder but also dual encoder or brake can be optionally chosen. All joint actuators support RS485, CAN Bus or EtherCAT communication. Humanoids, AGV/AMR logistic robots and turn table applications are very suitable. For more information, please visit www.dkps.co.kr or contact daniel@dingsmotion.com Myactuator [Suzhou Micro Technology] Planetary Gearbox Joint Servo Actuator RMD-X Series Scara Demo](https://i.ytimg.com/vi/6OUkWv_ti94/mqdefault.jpg)









![Jiangsu DINGS participates in Y2022 37th KIMES Exhibition during 10th Mar~13th March, 2022.
Jiangsu DINGS participated in 37th Korea International Medical & Hospital Equipment Show during 10th Mar ~ 13th Mar, 2022. During this exhibition, Jiangsu DINGS officially announces NEMA6 [14mm stepper] solutions as rotary stepper motor, stepper motor linear actuator and hollow shaft motor. Also newly launched motion controllers plus Gripper and DLM Linear Module and slotted/slotless BLDC are exposing this show. It will be very attractive to customers. Jiangsu DINGS participates in Y2022 37th KIMES Exhibition during 10th Mar~13th March, 2022.](https://i.ytimg.com/vi/AKyuvzheRVY/mqdefault.jpg)