Uploaded December 2016 | Updated September 2026, 2 weeks ago
Before you go ahead please note I use an app called Vue Smart Home, it should have all the same options as 360eye, work and look very similar but imo is a more stable app. If it's not on googleplay then the 360eye app will be fine
http://m.banggood.com/Digoo-BB-M1-Wireless-WiFi-USB-Baby-Monitor-Alarm-Home-Security-IP-Camera-HD-720P-Two-Way-Audio-p-1083520.html
Link Vue Smart Home by John Yao
https://appsto.re/gb/sJkTbb.i
1) So you're connected to AP in phone wifi settings 👍🏾
2) Open 360eye app and go to Device List
3) Hit the + on the top right
4) Choose DEVICE LINKED - manual setup
5) You'll see 4 tabs, on the first tab there's a QR reader, hit that and scan the code on the camera sticker
6) It'll find camera and set it up. LEAVE ALL OTHER SETTINGS ALONE, we'll sort those later
7)Press back arrow at bottom to go back to Device List screen then hit SETTINGS then NETWORK SETTINGS
8) AP is the first box and it's ticked, you want to tick the STATION box.
9) In the wifi list, select your wifi and put in credentials. This will take your camera out of AP and connects it to wifi. The camera will start talking, wait for it to say WIFI CONNECTED! Please note that you CANNOT connect to 5ghz wifi, only 2.4ghz or 2ghz
10) Once that's connected, hit SAVE on top right, then back arrow on top left, then go to USER MANAGEMENT.
11) From here you will secure your camera. Change USERNAME, NEW PASSWORD & CONFIRM ONLY! Old password box stays blank. Hit save and you're finished.
If this helped I would appreciate some feedback on my vlogs if you have any spare time to watch them lol
Before you go ahead please note I use an app called Vue Smart Home, it should have all the same options as 360eye, work and look very similar but imo is a more stable app. If it's not on googleplay then the 360eye app will be fine
http://m.banggood.com/Digoo-BB-M1-Wireless-WiFi-USB-Baby-Monitor-Alarm-Home-Security-IP-Camera-HD-720P-Two-Way-Audio-p-1083520.html
Link Vue Smart Home by John Yao
https://appsto.re/gb/sJkTbb.i
1) So you're connected to AP in phone wifi settings 👍🏾
2) Open 360eye app and go to Device List
3) Hit the + on the top right
4) Choose DEVICE LINKED - manual setup
5) You'll see 4 tabs, on the first tab there's a QR reader, hit that and scan the code on the camera sticker
6) It'll find camera and set it up. LEAVE ALL OTHER SETTINGS ALONE, we'll sort those later
7)Press back arrow at bottom to go back to Device List screen then hit SETTINGS then NETWORK SETTINGS
8) AP is the first box and it's ticked, you want to tick the STATION box.
9) In the wifi list, select your wifi and put in credentials. This will take your camera out of AP and connects it to wifi. The camera will start talking, wait for it to say WIFI CONNECTED! Please note that you CANNOT connect to 5ghz wifi, only 2.4ghz or 2ghz
10) Once that's connected, hit SAVE on top right, then back arrow on top left, then go to USER MANAGEMENT.
11) From here you will secure your camera. Change USERNAME, NEW PASSWORD & CONFIRM ONLY! Old password box stays blank. Hit save and you're finished.
If this helped I would appreciate some feedback on my vlogs if you have any spare time to watch them lol
