Diagnosing Intonation Problems on a Taylor110e @EricSchaeferGuitars
Diagnosing Intonation Problems on a Taylor110e  @EricSchaeferGuitars
Uploaded July 2026 | Updated November 2026, 2 hours ago
πŸͺšFREE: 8-part video course on building your first acoustic guitar, from my online course β†’ ericschaeferguitars.com/get-the-free-course-content

In this BenchStream, I am diagnosing some poor intonation on a Taylor 110e, and talking about the solutions for pitted frets. I also discuss my opinions on laminated tops and backs Also, I am answering your burning lutherie questions!

πŸ”΄ Register for a Hands-On Guitar Building Workshop:
ericschaeferguitars.com/learn-to-build-your-own-guitar

πŸ”΄ Check out the Online Guitar Building School:
ericschaeferguitars.com/course-directory

πŸ”΄ To commission an instrument from Eric:
ericschaeferguitars.com/instruments-ordering

πŸ”΄ Check out the Radial Rosette Maker Jig:
ericschaeferguitars.com/the-radial-rosette-maker-kit

πŸ”΄ Donate and Support US Military Special Operators through the Art of Guitar Building:
reveilleguitarproject.org/donate
Diagnosing Intonation Problems on a Taylor110eGuitar #106 is Finished! | A Critical Review by the LuthierQ&A | Repairs on Cheap Guitars, Bandsaws for resawing and More!Q&A | What has the Greatest Impact on Tone, 16 Fret Guitars, Parlor Plans, Fixing a Sunken BackplateRepairing and Setting Up One of the First Guitars I ever built!Q&A | Better Tone, Hand- Cut Binding Channels, Buying Finger PlanesInstalling Kerfing during a Guitar Build WorkshopGuitarmaking Q&A | Side Bending and Adapting Guitar PlansTru Oil Finish Application on Guitar #116Guitars #86 and #87 | Bending Wood Bindings and Drilling Tuner Holes2 Military Vets Building 2 Guitars in My ShopGuitar Making Q&A |  Lap Joints, Fret Levels, Bridge Plate Thickness
DIY Guitar Making |

Diagnosing Intonation Problems on a Taylor110e

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER