Uploaded June 2019 | Updated November 2026, 3 hours ago
Parts and tools used in this video:
Clockspring replacement part is not available on Amazon. Look into eBay or local parts store.
Airbag simulator: amzn.to/3KcOlv0
Steering wheel puller tool: amzn.to/2Tysq6I
A link to my FAVORITE, most used tool - the Milwaukee electric ratchet!
amzn.to/2ZzSD96
Today in Javo's Garage we're changing the clockspring (or spiral cable) on a 2004 Toyota Corolla. This should apply to 2002-2008 Toyota Corolla and Matrix as well as the Pontiac Vibe. Step by step instructions along with part numbers and tools used to complete the job. Perform an inspection and diagnosis to verify your problem.
Thanks for stopping by my garage, I hope this tutorial helps you. Please feel free to ask any questions.
Other Tools Needed:
#30 Torx socket and ratchet
19MM Socket & ratchet (breaker bar Is better) with 3" extension
Torque wrench - amzn.to/3c35cfs
-AND-
harborfreight.com/14-in-drive-click-type-torque-wrench-63881.html
Micro straight screwdriver
Phillips screwdriver
Small prybar (Hyper Tough tack lifter Walmart #565421890) -OR- amzn.to/3d1HoKr
Flashlight
Rag
Torque Specs:
Steering column bolt - 37 ft. lbs.
Airbag mounting bolts - 78 in. lbs. or 6.5 ft. lbs.
As an Amazon Associate I earn from qualifying purchases.
Thank you for visiting and supporting my channel.
DISCLAIMER: The information provided in this video is for educational and entertainment purposes only and should not be construed as professional advice. The creators, producers, and distributors of this video do not assume any responsibility or liability for any errors or omissions in the content of this video or for any damages arising from the use or reliance on the information presented in this video. Viewers should consult their own professional advisors for advice and guidance. The use of any information provided in this video is solely at the viewer's own risk.
Parts and tools used in this video:
Clockspring replacement part is not available on Amazon. Look into eBay or local parts store.
Airbag simulator: amzn.to/3KcOlv0
Steering wheel puller tool: amzn.to/2Tysq6I
A link to my FAVORITE, most used tool - the Milwaukee electric ratchet!
amzn.to/2ZzSD96
Today in Javo's Garage we're changing the clockspring (or spiral cable) on a 2004 Toyota Corolla. This should apply to 2002-2008 Toyota Corolla and Matrix as well as the Pontiac Vibe. Step by step instructions along with part numbers and tools used to complete the job. Perform an inspection and diagnosis to verify your problem.
Thanks for stopping by my garage, I hope this tutorial helps you. Please feel free to ask any questions.
Other Tools Needed:
#30 Torx socket and ratchet
19MM Socket & ratchet (breaker bar Is better) with 3" extension
Torque wrench - amzn.to/3c35cfs
-AND-
harborfreight.com/14-in-drive-click-type-torque-wrench-63881.html
Micro straight screwdriver
Phillips screwdriver
Small prybar (Hyper Tough tack lifter Walmart #565421890) -OR- amzn.to/3d1HoKr
Flashlight
Rag
Torque Specs:
Steering column bolt - 37 ft. lbs.
Airbag mounting bolts - 78 in. lbs. or 6.5 ft. lbs.
As an Amazon Associate I earn from qualifying purchases.
Thank you for visiting and supporting my channel.
DISCLAIMER: The information provided in this video is for educational and entertainment purposes only and should not be construed as professional advice. The creators, producers, and distributors of this video do not assume any responsibility or liability for any errors or omissions in the content of this video or for any damages arising from the use or reliance on the information presented in this video. Viewers should consult their own professional advisors for advice and guidance. The use of any information provided in this video is solely at the viewer's own risk.










