Uploaded April 2020 | Updated September 2026, 1 week ago
In this episode, we will be looking at a new design we came up with for a smaller camera stand to shoot B-Roll. We started at the sketch book and then turned to Fusion 360 to create this rather unique stand which is basically only one part!
As it is really just one leg replicated three (3) times and we use three 1/4-20 nylong bolts (see more here: amzn.to/2wGOmE6 ) to form the adjustable legs and yes before ask you can use metal [bolts] however it just make the stand a little heaver. Also there is 20mm center 1/4-20 nylon bolt (see more here: amzn.to/38ymjUI) which cinch's the three legs to a mini-ball head (see more here: amzn.to/2TBtuHI ). With this legs can be moved as needed to get into tight spaces as well as the 1/4-20 leg bolt can be used to level or angle the platform for what ever effect your looking for. This also makes for a low profile assembly too, so it is not so conspicuous to leave somewhere for those long times lapse and when your done it packs up small!
Spider Leg B-Roll Camera Stand: thingiverse.com/thing:4210315
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
In this episode, we will be looking at a new design we came up with for a smaller camera stand to shoot B-Roll. We started at the sketch book and then turned to Fusion 360 to create this rather unique stand which is basically only one part!
As it is really just one leg replicated three (3) times and we use three 1/4-20 nylong bolts (see more here: amzn.to/2wGOmE6 ) to form the adjustable legs and yes before ask you can use metal [bolts] however it just make the stand a little heaver. Also there is 20mm center 1/4-20 nylon bolt (see more here: amzn.to/38ymjUI) which cinch's the three legs to a mini-ball head (see more here: amzn.to/2TBtuHI ). With this legs can be moved as needed to get into tight spaces as well as the 1/4-20 leg bolt can be used to level or angle the platform for what ever effect your looking for. This also makes for a low profile assembly too, so it is not so conspicuous to leave somewhere for those long times lapse and when your done it packs up small!
Spider Leg B-Roll Camera Stand: thingiverse.com/thing:4210315
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
