Uploaded December 2023 | Updated November 2026, 22 hours ago
Timestamps:
0:00 – Introduction
0:15 – Prerequisite - Software
0:30 – Prerequisite - Hardware
1:05 – Project Scope and Steps
1:38 – Step 1: Setup the Hardware
1:42 – Step 2: Download the project from the kit page
1:58 – Step 3: Open the project and launch MCC
2:05 – Step 4: Check the peripheral configurations in MCC
3:55 – Step 6: Review the Application code
4:26 – Step 7: Compile the project and see the Output
5:19 – More application demos on PIC32CZ CA90 Curiosity Ultra Evaluation Kit
5:28 – More information on MPLAB Harmony
This video introduces and explains how to get started with PIC32CZ CA90 Curiosity Ultra Evaluation Board. This project is based on an Arm® Cortex®-M7-based PIC32CZ CA90 MCU with an integrated hardware security module (HSM). This application demonstrates how to toggle LED0 by pressing switch SW-0 on a timeout basis and viewing the LED toggling rate on the serial terminal. The periodicity of the timeout will change from 500 milliseconds to one second, two seconds, four seconds, and back to 500 milliseconds every time you press switch SW 0. The periodicity will not change while switching between SW-0 to SW-1 or vice versa. The demo application has extended functionality to read and print the current room temperature periodically using the onboard temperature sensor when pressing the switch SW-1. The temperature reading is displayed every second on the serial console.
PIC32CZ CA90 Curiosity Ultra Evaluation Board page microchip.com/en-us/development-tool/ea58x56a
· Microchip’s Microcontrollers and Microprocessors product page microchip.com/en-us/products/microcontrollers-and-microprocessors
· MPLAB Reference Apps GitHub github.com/Microchip-MPLAB-Harmony/reference_apps
· GitHub link for PIC32CZ CA80 Curiosity Ultra Evaluation Board github.com/Microchip-MPLAB-Harmony/reference_apps/tree/master/apps/pic32cz_ca80_cult
· Demo user guide github.com/Microchip-MPLAB-Harmony/reference_apps/blob/master/apps/pic32cz_ca80_cult/pic32cz_ca80_getting_started_ext/readme.md
· Reference Applications for PIC32CZ Family:
github.com/Microchip-MPLAB-Harmony/reference_apps_pic32cz
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC: youtu.be/0rNFSlsVwVw?feature=shared
Timestamps:
0:00 – Introduction
0:15 – Prerequisite - Software
0:30 – Prerequisite - Hardware
1:05 – Project Scope and Steps
1:38 – Step 1: Setup the Hardware
1:42 – Step 2: Download the project from the kit page
1:58 – Step 3: Open the project and launch MCC
2:05 – Step 4: Check the peripheral configurations in MCC
3:55 – Step 6: Review the Application code
4:26 – Step 7: Compile the project and see the Output
5:19 – More application demos on PIC32CZ CA90 Curiosity Ultra Evaluation Kit
5:28 – More information on MPLAB Harmony
This video introduces and explains how to get started with PIC32CZ CA90 Curiosity Ultra Evaluation Board. This project is based on an Arm® Cortex®-M7-based PIC32CZ CA90 MCU with an integrated hardware security module (HSM). This application demonstrates how to toggle LED0 by pressing switch SW-0 on a timeout basis and viewing the LED toggling rate on the serial terminal. The periodicity of the timeout will change from 500 milliseconds to one second, two seconds, four seconds, and back to 500 milliseconds every time you press switch SW 0. The periodicity will not change while switching between SW-0 to SW-1 or vice versa. The demo application has extended functionality to read and print the current room temperature periodically using the onboard temperature sensor when pressing the switch SW-1. The temperature reading is displayed every second on the serial console.
PIC32CZ CA90 Curiosity Ultra Evaluation Board page microchip.com/en-us/development-tool/ea58x56a
· Microchip’s Microcontrollers and Microprocessors product page microchip.com/en-us/products/microcontrollers-and-microprocessors
· MPLAB Reference Apps GitHub github.com/Microchip-MPLAB-Harmony/reference_apps
· GitHub link for PIC32CZ CA80 Curiosity Ultra Evaluation Board github.com/Microchip-MPLAB-Harmony/reference_apps/tree/master/apps/pic32cz_ca80_cult
· Demo user guide github.com/Microchip-MPLAB-Harmony/reference_apps/blob/master/apps/pic32cz_ca80_cult/pic32cz_ca80_getting_started_ext/readme.md
· Reference Applications for PIC32CZ Family:
github.com/Microchip-MPLAB-Harmony/reference_apps_pic32cz
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC: youtu.be/0rNFSlsVwVw?feature=shared










