Uploaded March 2019 | Updated November 2026, 11 hours ago
This is a setup for ground clipping into Deku Princess' cell, and does not use any initial positions. For which frames to look for when buffering the goron clip, see my setup that uses Great Fairy's Sword (youtube.com/watch?v=VcJk1oDlCKg).
Steps:
-- Target the wall to get its angle.
-- Roll into the corner of the vines, as shown. Rolling into the corner repeatedly gives you a consistent position. I would recommend at least two rolls, as I did in the video.
-- Shield turn right. I draw my sword here to save a few frames.
-- Target and do a short roll (flick the control stick forward and press A).
-- Shield turn left. It's important that you are targeting as you crouch for your shield turn to keep a consistent camera angle. I recommend holding target through the first short roll, then beginning to hold shield before you release target. If you don't hold target your camera will begin to pan and this will mess up your angle after the shield turn.
-- Target and short roll again.
-- Remaining targeted, perform two vertical slashes (just press B twice).
-- Now you are in position to shield turn right, drop a bomb and turn goron for the clip.
This is a setup for ground clipping into Deku Princess' cell, and does not use any initial positions. For which frames to look for when buffering the goron clip, see my setup that uses Great Fairy's Sword (youtube.com/watch?v=VcJk1oDlCKg).
Steps:
-- Target the wall to get its angle.
-- Roll into the corner of the vines, as shown. Rolling into the corner repeatedly gives you a consistent position. I would recommend at least two rolls, as I did in the video.
-- Shield turn right. I draw my sword here to save a few frames.
-- Target and do a short roll (flick the control stick forward and press A).
-- Shield turn left. It's important that you are targeting as you crouch for your shield turn to keep a consistent camera angle. I recommend holding target through the first short roll, then beginning to hold shield before you release target. If you don't hold target your camera will begin to pan and this will mess up your angle after the shield turn.
-- Target and short roll again.
-- Remaining targeted, perform two vertical slashes (just press B twice).
-- Now you are in position to shield turn right, drop a bomb and turn goron for the clip.
![[Concept] Fixing Kamaro BA Text with Keaton BA
[JP 1.0 on Bizhawk]
First I show the crash that Kamaro BA causes. It sets the address Ive called Text Thing, 1F372E, to a nonzero value (specifically 0x17), which causes the game to crash on text boxes or loading zones (saving with this not as 0x00 also invalidates your file).
Second, I manually freeze the value at 0x00 while doing the Kamaro BA to bypass the text box crash, then set it manually to 0x17, going through the load zone to crash.
Third, I freeze it at 0x00 to bypass the text box, set it to 0x17, then use Keaton Mask BA, which sets the text byte back to 0x00, getting rid of the problem. This also sets Temp B back to 0x00, but that should be okay if we get the item onto an actual B button in the process. As far as I can tell, the only part of this that is infeasible on a console is bypassing the initial Kamaro BA textbox. [Concept] Fixing Kamaro BA Text with Keaton BA](https://i.ytimg.com/vi/NvtP996ebYs/mqdefault.jpg)









