Deck Overhangs: How Far Is Too Far? @Buildtuff
Deck Overhangs: How Far Is Too Far?  @Buildtuff
Uploaded February 2026 | Updated November 2026, 3 hours ago
Once there’s a solid reference point, the outer frame goes in first. The first four blocks are set back about 12" (300 mm) so they stay hidden, which creates a small overhang that can be supported later with blocking. Some of that blocking was added early - timing isn’t critical, as long as it’s done.

You might notice a bit of sag at this stage, but that gets corrected once the rest of the joists and blocking are installed. On a deck this size, pushing an overhang much past 12" (300 mm) isn’t ideal, so a few extra TuffBlocks and more blocking were added for proper support. Not a deal breaker - just part of the learning process. Curious how you would’ve handled it?

Build On.

#buildtuff #tuffblock #DIYCommunity
#deck #deckbuild #decking #lowes #homedepot #deckframe #deckandpatio #deckdesign #professionaldeckbuilders #deckframing
Deck Overhangs: How Far Is Too Far?How to Spot & Fix Crowning in LumberDon’t Skip This Joist CheckRated 4.9 stars for a reason 🙌Floating Deck Build: Foundation to Finished Deck | TuffBlockShed Builders Tip for Building on a SlopeAre TuffBlocks Actually Cheaper Than Concrete?The LVL UP series wraps with real Australian customer reviews. Rated 4.9 stars by builders and DIYerSee how this DIYer builds his deck using TuffBlocks!Building an Easy Ultra-Low Deck Foundation (with TuffBlock Deck Blocks)Solo DIY Builder Tips: How to Stand HEAVY Walls!Every TuffBlock is rated to 770kg, and we tested well past it. Spacing up to 1.5m spreads the load a
BuildTuff |

Deck Overhangs: How Far Is Too Far?

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER