Uploaded March 2022 | Updated September 2026, 1 week ago
In part 2 of this DIY CO2 laser cutter video series I tackle building a frame. As I considered what material to use for this project I relied on my engineering experience and chose aluminum extrusion. This material is like an erector set for engineers, it's very modular and easy to use. I assembled the frame according to my model. I used a special internal 90 degree bracket to make it easier to put the enclosure panels in when it comes time to do so. I also designed and printed some V wheel plates for a temporary mock up of the laser head gantry. Finally with the laser tube mounted I test fired the tube again. And I never get tired of seeing this thing ignite wood!
Watch part 1 here: youtu.be/ugApM5MX3Fo
New videos are uploaded on Fridays!
Try Altium Designer for free: bit.ly/AltiumByteSized
Get 30% discount on purchase: bit.ly/AltiumDiscount
If you're like me you have creative ideas that are trapped inside your mind. Byte Sized Engineering videos will give you the knowledge, inspiration, and confidence to make your creative ideas a reality. You are more capable than you think, and I want to help you unleash your inner maker!
You shouldn’t need an engineering degree to make your ideas a reality. I suffered through years of engineering school so you don’t have to. I know how it feels to want to make something I’m excited and passionate about, but also feel overwhelmed by not knowing where to start. I’ve unlocked the secret to getting past this feeling of being stuck. In my videos I show you how to take complex problems and break them down into smaller, more manageable “byte sized” pieces.
If you want my recommendation on what you should watch, I put together this playlist for you. youtube.com/playlist?list=PL8Udln1nmXVBEdorJ2xU5VnXn1nfmMM--
You should also subscribe to byte sized, and consider become a supporting member through Patreon or YouTube memberships. Supporting members get access to behind the scenes content, free project build guides, discord community server, early release videos, and monthly hangouts. Thanks for taking the time to watch this video, I look forward to seeing you next time!
Subscribe: youtube.com/bytesized?sub_confirmation=1
Instagram: instagram.com/bytesizedzach
YouTube Memberships: youtube.com/channel/UCtVgFluK-MmGpQoE7VCxa6w/join
Patreon: patreon.com/bytesized
Byte sized merchandise: teespring.com/stores/byte-sized
If you're interested in what tools I use for byte sized projects, please visit:
bytesizedengineering.com/tools
In part 2 of this DIY CO2 laser cutter video series I tackle building a frame. As I considered what material to use for this project I relied on my engineering experience and chose aluminum extrusion. This material is like an erector set for engineers, it's very modular and easy to use. I assembled the frame according to my model. I used a special internal 90 degree bracket to make it easier to put the enclosure panels in when it comes time to do so. I also designed and printed some V wheel plates for a temporary mock up of the laser head gantry. Finally with the laser tube mounted I test fired the tube again. And I never get tired of seeing this thing ignite wood!
Watch part 1 here: youtu.be/ugApM5MX3Fo
New videos are uploaded on Fridays!
Try Altium Designer for free: bit.ly/AltiumByteSized
Get 30% discount on purchase: bit.ly/AltiumDiscount
If you're like me you have creative ideas that are trapped inside your mind. Byte Sized Engineering videos will give you the knowledge, inspiration, and confidence to make your creative ideas a reality. You are more capable than you think, and I want to help you unleash your inner maker!
You shouldn’t need an engineering degree to make your ideas a reality. I suffered through years of engineering school so you don’t have to. I know how it feels to want to make something I’m excited and passionate about, but also feel overwhelmed by not knowing where to start. I’ve unlocked the secret to getting past this feeling of being stuck. In my videos I show you how to take complex problems and break them down into smaller, more manageable “byte sized” pieces.
If you want my recommendation on what you should watch, I put together this playlist for you. youtube.com/playlist?list=PL8Udln1nmXVBEdorJ2xU5VnXn1nfmMM--
You should also subscribe to byte sized, and consider become a supporting member through Patreon or YouTube memberships. Supporting members get access to behind the scenes content, free project build guides, discord community server, early release videos, and monthly hangouts. Thanks for taking the time to watch this video, I look forward to seeing you next time!
Subscribe: youtube.com/bytesized?sub_confirmation=1
Instagram: instagram.com/bytesizedzach
YouTube Memberships: youtube.com/channel/UCtVgFluK-MmGpQoE7VCxa6w/join
Patreon: patreon.com/bytesized
Byte sized merchandise: teespring.com/stores/byte-sized
If you're interested in what tools I use for byte sized projects, please visit:
bytesizedengineering.com/tools
