Boylei Hobby Time | DEATH STAR II + LED LASER TUTORIAL @Boylei | Uploaded September 2020 | Updated October 2024, 31 minutes ago.
#StarWars #DeathStar #Tutorial
There are many iconic images from the Star Wars universe, but one of the most iconic is obviously the big space ball known as the Death Star. Many of you have asked how to wire the LED filaments, so I made this project specifically to include a tutorial for how to do that. This is only for 12V LED filament bulbs. Please do not attempt with anything other than 12V bulbs.
And yes, I have seen Star Wars before. I understand that there are converging lasers at the base of the main laser when the Death Star fires its super weapon. I will try to figure out ways to accomplish that next time.
Materials:
12V LED Bulb amzn.to/2RnBGJs
Bandai Death Star II 1:2700000 Scale amzn.to/33kYejS
Softball Display Box amzn.to/3c0ePxi
Plastic Cement amzn.to/3aQ4xPx
Super Glue amzn.to/3hj9Pp7
Solder amzn.to/2Rnrj8K
Heat Shrink Tubing amzn.to/2ZxjpOB
Enamel Coated Wire amzn.to/2FuRVlm
Old USB Chord
Masking Tape amzn.to/3hlux6Z
Supplies:
Air Brush amzn.to/3l76wUt
Compressor amzn.to/3hmTBeW
Safety Glasses amzn.to/3aJ6a1A
Respirator
Hand Drill/Pin Vice amzn.to/3gl0uMr
X-Acto Z Series amzn.to/3lpHGPW
Utility Knife amzn.to/3gizOM8
Ruler amzn.to/2QghRTO
Pencil
Nippers amzn.to/2CRDx5O
Wire Cutters amzn.to/34pvb0u
Tweezers amzn.to/3iVlUkW
Paint Brushes amzn.to/2FquzgJ
Helping Hands amzn.to/3hmEZvV
Soldering Iron amzn.to/2YmXVTW
Paint:
Primer - Krylon Flat Black Primer
Gray - Vallejo Sky Gray + Black or White for various shades
Green - Model Master Acrylic Transparent Green
Wire - Culture Hustle Black 3.0
Music:
Take It Easy - Bad Snacks
Lullaby - Yung Logos
Hanging Out - Bruno E.
Flames - Dan Henig
Disclaimer: Some of the actions seen in the video could cause bodily harm. I am not responsible for anything you do while attempting to recreate what you see in this video.
Affiliate links are used above.
#StarWars #DeathStar #Tutorial
There are many iconic images from the Star Wars universe, but one of the most iconic is obviously the big space ball known as the Death Star. Many of you have asked how to wire the LED filaments, so I made this project specifically to include a tutorial for how to do that. This is only for 12V LED filament bulbs. Please do not attempt with anything other than 12V bulbs.
And yes, I have seen Star Wars before. I understand that there are converging lasers at the base of the main laser when the Death Star fires its super weapon. I will try to figure out ways to accomplish that next time.
Materials:
12V LED Bulb amzn.to/2RnBGJs
Bandai Death Star II 1:2700000 Scale amzn.to/33kYejS
Softball Display Box amzn.to/3c0ePxi
Plastic Cement amzn.to/3aQ4xPx
Super Glue amzn.to/3hj9Pp7
Solder amzn.to/2Rnrj8K
Heat Shrink Tubing amzn.to/2ZxjpOB
Enamel Coated Wire amzn.to/2FuRVlm
Old USB Chord
Masking Tape amzn.to/3hlux6Z
Supplies:
Air Brush amzn.to/3l76wUt
Compressor amzn.to/3hmTBeW
Safety Glasses amzn.to/3aJ6a1A
Respirator
Hand Drill/Pin Vice amzn.to/3gl0uMr
X-Acto Z Series amzn.to/3lpHGPW
Utility Knife amzn.to/3gizOM8
Ruler amzn.to/2QghRTO
Pencil
Nippers amzn.to/2CRDx5O
Wire Cutters amzn.to/34pvb0u
Tweezers amzn.to/3iVlUkW
Paint Brushes amzn.to/2FquzgJ
Helping Hands amzn.to/3hmEZvV
Soldering Iron amzn.to/2YmXVTW
Paint:
Primer - Krylon Flat Black Primer
Gray - Vallejo Sky Gray + Black or White for various shades
Green - Model Master Acrylic Transparent Green
Wire - Culture Hustle Black 3.0
Music:
Take It Easy - Bad Snacks
Lullaby - Yung Logos
Hanging Out - Bruno E.
Flames - Dan Henig
Disclaimer: Some of the actions seen in the video could cause bodily harm. I am not responsible for anything you do while attempting to recreate what you see in this video.
Affiliate links are used above.
