Uploaded October 2024 | Updated November 2026, 19 hours ago
In this video I show you how I brought a dead desktop computer PC back to life.
I knew all the cables were good so I didn't have to test if the cables were allowing power to the computer.
First step is to find out if its a motherboard issue or power supply issue.
I got lucky that the battery was the problem. Battery is rated for 3.3V and it was at 2.8V.
To check the motherboard further, I would disconnect all peripherals like Disc drives, RAM memory, hard disk, and video card. Just leave the power cables connected to the motherboard. You should at least get the CPU fan.
You can also check the power switch, there should be some pins on the motherboard where the cable to the switch connects to. If the switch is bad, try bridging the two pins together that go to the power switch. Use a screwdriver, tweezers, or paper clip.
If the motherboard is bad, you will need to replace it unless you can find someone that can do advanced troubleshooting for a good price.
In this video I show you how I brought a dead desktop computer PC back to life.
I knew all the cables were good so I didn't have to test if the cables were allowing power to the computer.
First step is to find out if its a motherboard issue or power supply issue.
I got lucky that the battery was the problem. Battery is rated for 3.3V and it was at 2.8V.
To check the motherboard further, I would disconnect all peripherals like Disc drives, RAM memory, hard disk, and video card. Just leave the power cables connected to the motherboard. You should at least get the CPU fan.
You can also check the power switch, there should be some pins on the motherboard where the cable to the switch connects to. If the switch is bad, try bridging the two pins together that go to the power switch. Use a screwdriver, tweezers, or paper clip.
If the motherboard is bad, you will need to replace it unless you can find someone that can do advanced troubleshooting for a good price.










