Uploaded October 2025 | Updated November 2026, 1 day ago
Short instructional video about the Bobcat B730 daily inspection and maintenance.
00:00 – Intro
00:38 – Check the bucket teeth wear & windows
01:08 – Front loader greasing: 14 Nipples per side
01:48 – Backhoe greasing: 23 Nipples
03:02 – Never reach or work under raised lift arms or backhoe boom. Use approved lift arm support.
03:28 – Make sure engine is off before you proceed
03:32 – Check air filter / clean or replace if needed
03:53 – Check water separator
03:57 – Check engine oil level / add if needed
04:20 – Check transmission oil level / add if needed
04:33 – Check coolant level COLD / add premixed coolant if needed
04:44 – Check coolant hoses
04:49 – Check belts
04:56 – Check hydraulic fluid level / add if needed
05:15 – Check tires for cracks and damage
05:20 – Check wheel nuts torque: Front wheel nut: 310 - 350 N·m, Rear wheel nut: 530 - 570 N·m
05:34 – Check tire pressure
05:42 – Check seat belt
05:51 – Check lights
06:06 – Check service brake: Unlock break pedals
06:11 – Check service brake: Start Engine
06:15 – Check service brake: Press left brake pedal and hold
06:18 – Check service brake: Select 3rd gear
06:22 – Check service brake: Release parking brake & Put level to FORWARD direction
06:26 – Check service brake: Slowly increase engine speed
06:31 – Check service brake: The machine should not move during the entire check
06:41 – Check service brake: Repeat with right brake pedal
06:45 – Check service brake: The machine should not move during the entire check
07:05 – Check service brake: If machine start to move, contact your Bobcat Dealer for service
07:13 – Check service brake: All controlers in neutral, release the brake pedal & engage the parking brake
Short instructional video about the Bobcat B730 daily inspection and maintenance.
00:00 – Intro
00:38 – Check the bucket teeth wear & windows
01:08 – Front loader greasing: 14 Nipples per side
01:48 – Backhoe greasing: 23 Nipples
03:02 – Never reach or work under raised lift arms or backhoe boom. Use approved lift arm support.
03:28 – Make sure engine is off before you proceed
03:32 – Check air filter / clean or replace if needed
03:53 – Check water separator
03:57 – Check engine oil level / add if needed
04:20 – Check transmission oil level / add if needed
04:33 – Check coolant level COLD / add premixed coolant if needed
04:44 – Check coolant hoses
04:49 – Check belts
04:56 – Check hydraulic fluid level / add if needed
05:15 – Check tires for cracks and damage
05:20 – Check wheel nuts torque: Front wheel nut: 310 - 350 N·m, Rear wheel nut: 530 - 570 N·m
05:34 – Check tire pressure
05:42 – Check seat belt
05:51 – Check lights
06:06 – Check service brake: Unlock break pedals
06:11 – Check service brake: Start Engine
06:15 – Check service brake: Press left brake pedal and hold
06:18 – Check service brake: Select 3rd gear
06:22 – Check service brake: Release parking brake & Put level to FORWARD direction
06:26 – Check service brake: Slowly increase engine speed
06:31 – Check service brake: The machine should not move during the entire check
06:41 – Check service brake: Repeat with right brake pedal
06:45 – Check service brake: The machine should not move during the entire check
07:05 – Check service brake: If machine start to move, contact your Bobcat Dealer for service
07:13 – Check service brake: All controlers in neutral, release the brake pedal & engage the parking brake










