Cut Then Print Method Using xTool AND the EufyMake E1 @LabcraftStudio
Cut Then Print Method Using xTool AND the EufyMake E1  @LabcraftStudio
Uploaded October 2026 | Updated November 2026, 3 hours ago
By viewer request, today I'm going to show you a better way to move your material from your laser cutter to your Eufymake E1 UV printer. This method forgoes the Print then Cut pathway and instead turns it on it's head. You'll waste less time, material and no registration marks needed!

πŸŒπŸ’€ Snail Skull Model by OverhangOverlord:
makerworld.com/en/models/1373588-snail-skull#profileId-1420695
(I used Geetech Shiny Black and DO3D Silk Coffee PLA, check my supplies list below if interested)

πŸ’° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)

πŸ›οΈ My Supply List (Affiliate link):
amzn.to/3ZofXUF

πŸ›οΈ Get xTool's new O1 Omni Printer Here: xtool.com/pages/the-best-desktop-uv-printer/?ref=zblqhfwg&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306

πŸ›οΈ Find out more about the Prestige R2 Pro and other DTF tools here:
aaprintsupplyco.com/?ref=labcraftstudio
And simply enter: labcraft at checkout for 5% off their entire order, good on all non-clearance items!

πŸ›οΈ Where you can find the Wham Bam E1 Silicon Mat Set: bit.ly/4s8hPxT

πŸ›οΈ Etsy and my Shop
etsy.com/shop/labcraftstudio/?etsrc=sdt
labcraftstudio.com

πŸ”” Curious about crafting with tech? Subscribe for tutorials on laser crafting, 3D printing, and DIY experiments that make innovation fun!
youtube.com/@LabcraftStudio/?sub_confirmation=1

βœ… Stay Connected With Me.

πŸ‘‰ Instagram: instagram.com/LabcraftStudio
πŸ‘‰ Website: labcraftstudio.com

πŸ“© For Business Inquiries: sarah@labcraftstudio.com

=============================

Chapters
00:00 Intro
02:04 Setting up Art for Printing and Creating an Offset for Cutting
04:56 Grab size for Jig from Scrap Material
06:10 Export Printing File to Send to EufyMake
06:49 Positioning and Resizing for Cut in P2s
07:50 Cutting and Transitioning to E1
08:11 Setting up Art for Printing in EufyMake Studio
09:23 Final Results

=============================

🎬 Recommended Playlists

πŸ‘‰ Laser Cutting
youtube.com/playlist?list=PLGTxgui-75qJbAiyM9saCLaWu3c8H0nhj

πŸ‘‰ Cricut Tutorials
youtube.com/playlist?list=PLGTxgui-75qJjvdNOcwFvh6fQqY6Y1v0F

🎬 WATCH MY OTHER VIDEOS:

πŸ‘‰ How I Make 3D Printed Bookmarks Using Bambu's MakerLab - Cute Gift Ideas
youtube.com/watch?v=EH82YKxiJCA

πŸ‘‰ How To Create Full Sticker Sheets With Cricut (No Waste) Step-By-Step Tutorial!
youtube.com/watch?v=xQwhPpJzmr4

πŸ‘‰ How To Sublimate 3D Prints Directly On Plate - Easy PLA & PETG Sublimation Tips
youtube.com/watch?v=FG60jMIte5k

πŸ‘‰ How I Started A 3D Printing Business: Best Guide For Small Businesses (2024)
youtube.com/watch?v=WXeMOCd0bp

=============================

⚠️ Disclaimer: I do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your research.

βœ–οΈ Copyright Notice: This video and my YouTube channel contain dialogue, music, and images that are the property of Labcraft Studio. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to my YouTube channel is provided.

Β© Labcraft Studio
Cut Then Print Method Using xTool AND the EufyMake E1eufyMake is Now Releasing an Air Purifier....Is it Too Late?My Thanksgiving Caramel Pumpkin Pie got an upgrade this year….Make Perfect Full Page Stickers FASTER Than with Cricut!Designing 3D Bee Earrings 🐝 #3dprinting #shapr3d #earrings designCustomizing Your Cricut Settings for Perfect Stickers with this Hack 🀯Let’s make flower pins 🌸 #kawaii #crafts #3dprintingHow to Foil Stickers Using the xTool O1 Omni Printer!How I Made Cute 3D Printed Taco Pins at HomeDitch The Glue: Laser Weld Your Acrylic Like A Pro!I Made the BIGGEST Custom Acrylic Puzzle Order EVER Worth $3500My biggest 3D print yet…absolutely stunning…. Fulv’s Christmas Castle!
Labcraft Studio |

'Cut Then Print' Method Using xTool AND the EufyMake E1

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER