Uploaded April 2014 | Updated November 2026, 2 hours ago
Customize it for the can and desired serving size.
Glue the two pieces (I used epoxy).
If you have trouble making the slicer stick to your print bed, try adding a "skirt" in Slic3r.
thingiverse.com/thing:293555
Customize it for the can and desired serving size.
Glue the two pieces (I used epoxy).
If you have trouble making the slicer stick to your print bed, try adding a "skirt" in Slic3r.
thingiverse.com/thing:293555










