Uploaded July 2025 | Updated September 2026, 2 weeks ago
Combining the EufyMake E1 UV printer with the xTool S1 Diode laser, check out how I make this custom artwork with a themed frame using TruFlat plywood!
00:00 Introduction
01:03 Creating the Frame in Lightburn
09:20 Material prep and laser cutting
11:35 Cleaning and assembling parts
13:12 UV Printing setup
14:54 Wall hanging option
15:40 Final Thoughts
Check out the machines and materials used in this video using my affiliate links to help support this channel!
Machines
xTool S1 40w Diode Laser - xtool.com/products/xtool-s1-laser-cutter?ref=vintauri&utm_medium=5306&utm_source=influencer
xTool AP2 Air Purifier - xtool.com/products/xtool-safetypro-ap2?ref=vintauri&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
EufyMake E1 UV Printer - eufymake.sjv.io/3JajLv
Materials
TruFlat PlyWood - truflatplywood.com
3M Polyester Laminating Tape - amzn.to/3H452tQ
Purity Lens Cleaner - amzn.to/44VselS
Starbond CA - amzn.to/471SzBr
Video on creating laser-cut wall hangars - youtube.com/watch?v=8UaRIJ76nHg
Become a channel member here:
youtube.com/channel/UC93sJsqzmDqkYrEHUPDQzuQ/join
Follow me on Instagram and Facebook for behind-the-scenes on what is happening in my workshop!
instagram.com/vintauri
facebook.com/VintaurisWorkshop
Check out my Etsy and Amazon store for more ways to support this channel!
vintaurisworkshop.etsy.com
amazon.com/shop/vintauri
✋ Disclaimer: Some links are affiliate links, meaning if you buy something, I may make a small commission at no additional cost. As an Amazon Associate, I earn from qualifying purchases.
Digital Calipers - amzn.to/3THuR5e
3mm Baltic Birch Plywood - amzn.to/43BuYEd
CA Glue and Accelerator - amzn.to/3TZz2d5
Acrylic Paint Pens - amzn.to/4b8Ty2c
#diyart #laserart #uvprinting #eufymake #xtool #xtools1 #truflat #lightburn
@xToollaser @eufyMake @StarbondAdhesives @TruFlatPlywood @lightburnsoftware7189
Combining the EufyMake E1 UV printer with the xTool S1 Diode laser, check out how I make this custom artwork with a themed frame using TruFlat plywood!
00:00 Introduction
01:03 Creating the Frame in Lightburn
09:20 Material prep and laser cutting
11:35 Cleaning and assembling parts
13:12 UV Printing setup
14:54 Wall hanging option
15:40 Final Thoughts
Check out the machines and materials used in this video using my affiliate links to help support this channel!
Machines
xTool S1 40w Diode Laser - xtool.com/products/xtool-s1-laser-cutter?ref=vintauri&utm_medium=5306&utm_source=influencer
xTool AP2 Air Purifier - xtool.com/products/xtool-safetypro-ap2?ref=vintauri&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
EufyMake E1 UV Printer - eufymake.sjv.io/3JajLv
Materials
TruFlat PlyWood - truflatplywood.com
3M Polyester Laminating Tape - amzn.to/3H452tQ
Purity Lens Cleaner - amzn.to/44VselS
Starbond CA - amzn.to/471SzBr
Video on creating laser-cut wall hangars - youtube.com/watch?v=8UaRIJ76nHg
Become a channel member here:
youtube.com/channel/UC93sJsqzmDqkYrEHUPDQzuQ/join
Follow me on Instagram and Facebook for behind-the-scenes on what is happening in my workshop!
instagram.com/vintauri
facebook.com/VintaurisWorkshop
Check out my Etsy and Amazon store for more ways to support this channel!
vintaurisworkshop.etsy.com
amazon.com/shop/vintauri
✋ Disclaimer: Some links are affiliate links, meaning if you buy something, I may make a small commission at no additional cost. As an Amazon Associate, I earn from qualifying purchases.
Digital Calipers - amzn.to/3THuR5e
3mm Baltic Birch Plywood - amzn.to/43BuYEd
CA Glue and Accelerator - amzn.to/3TZz2d5
Acrylic Paint Pens - amzn.to/4b8Ty2c
#diyart #laserart #uvprinting #eufymake #xtool #xtools1 #truflat #lightburn
@xToollaser @eufyMake @StarbondAdhesives @TruFlatPlywood @lightburnsoftware7189
