Crystal Glue cells in series Powering a LED with capacitor @ibpointless2
Crystal Glue cells in series Powering a LED with capacitor  @ibpointless2
Uploaded March 2012 | Updated November 2026, 3 hours ago
I took 9 crystal glue cells and put them in series to charge a capacitor. The 9 gives over 12 volts but at the shooting of the video the capacitor had only 4 volts in it as to not blow out the LED. The cells slowly charge up the capacitor. The reason for doing this is because the cell have a high resistance so they give low amps so I charge capacitors because they have low resistance so i can have all the amps i want. You only need voltage to charge capacitors and that's what i do, i find it better if every cell charges a capacitor instead of hooking the load directly to the cell itself. I'm going to scale this up, i want a big box of these things charging super caps so that I can power my LED's off the super caps. The great thing about these cells is that they can be shorted out for months and bounce right back to normal, so long as the electrodes are protected from the elements they will continue to give you power. Also these cells don't need water to run, actually better that these cells never see water again. I will seal up these cells completely as water is what destroys any galvanic battery electrodes.
Crystal Glue cells in series Powering a LED with capacitorThe Amps of the 800mV water captretSolar Panel Can Produce Overunity4 Plate Capacitor Current In Both Directions C-StackMagnesium semiconductor crystal cell no electrolyteKarpens Pile replication - Electricity from ambient heatCaptret self charges when capacitor is shorted outRan data logger again cell is getting strongerVoltage From a Shorted out Test LeadPaper and Pencil BatteryGlue Crystal cell powering LCD clockGraphite only distilled water battery
ibpointless2 |

Crystal Glue cells in series Powering a LED with capacitor

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER