Uploaded November 2026 | Updated November 2026, 1 day ago
MultiWAVE is an eight Channel dual Wavetable Oscillator, and even when Activating those Channels at once the overall sound can be thickened with per-Channel variations.
The secret to this is to utilize the Spread control, which adds variation to each Channel's Spread-able parameters (namely, Osc A wavetable position, Osc A pitch, Osc B wavetable position and Modulation time). Among other things, this can add an orchestral character to the stack of tones, with all the movement inherent in slightly different, evenly tuned simultaneous sounds.
To create a Unison sound on MultiWAVE, select the Parallel Span mode (the cyan one), and set Span to 1. Patch a gate source to Activation and a pitch control voltage to the v/oct input.
(Additionally, MultiWAVE's Output Mixing is in use here. By pressing its Page 2 button and then pressing its Mode button, MultiWAVE enters its Output Mixing mode. When working this way, the first four Channel outputs remain individual outs for Channels 1-4, Output 5 is a mono mix of all eight Channels (Osc A only), Output 6 is the same but for Osc B, and Outputs 7 and 8 are a mix of both Oscillators but only contain the Odd and Even Channels respectively.
On Page 2, the SPAN window lights GREEN to indicate Mixing is ON, or RED to indicate Mixing is OFF.)
The result of this sound is mixed through a pair of QXGs (with individual channels 3 and 4 switched off) and then into QPAS, running in stereo lowpass filter mode. Finally, this is patched to Plexiphon for texture and space.
makenoisemusic.com
MultiWAVE is an eight Channel dual Wavetable Oscillator, and even when Activating those Channels at once the overall sound can be thickened with per-Channel variations.
The secret to this is to utilize the Spread control, which adds variation to each Channel's Spread-able parameters (namely, Osc A wavetable position, Osc A pitch, Osc B wavetable position and Modulation time). Among other things, this can add an orchestral character to the stack of tones, with all the movement inherent in slightly different, evenly tuned simultaneous sounds.
To create a Unison sound on MultiWAVE, select the Parallel Span mode (the cyan one), and set Span to 1. Patch a gate source to Activation and a pitch control voltage to the v/oct input.
(Additionally, MultiWAVE's Output Mixing is in use here. By pressing its Page 2 button and then pressing its Mode button, MultiWAVE enters its Output Mixing mode. When working this way, the first four Channel outputs remain individual outs for Channels 1-4, Output 5 is a mono mix of all eight Channels (Osc A only), Output 6 is the same but for Osc B, and Outputs 7 and 8 are a mix of both Oscillators but only contain the Odd and Even Channels respectively.
On Page 2, the SPAN window lights GREEN to indicate Mixing is ON, or RED to indicate Mixing is OFF.)
The result of this sound is mixed through a pair of QXGs (with individual channels 3 and 4 switched off) and then into QPAS, running in stereo lowpass filter mode. Finally, this is patched to Plexiphon for texture and space.
makenoisemusic.com

