Uploaded January 2020 | Updated September 2026, 2 weeks ago
This video walks through the installation of the TH3D EZboard Creality motherboard upgrade that is a drop-in replacement for the Creality CR10 and Ender line of printers. Over the course of the last year, I have replaced the extruder, print bed, Bowden tube, firmware and hot end on my Ender 5. This amounts to over $300 of upgrades to a $340 printer. Does this make sense? Is it worth it? With all of these upgrades is this Ender 5 better than a Prusa i3 Mk3?
After watching the video please leave your opinions in the comments about spending hundreds of dollars to upgrade a 3d printer vs purchasing a higher-priced printer with the features already installed.
Here is a link to the TH3D website where you can purchase the EZboard featured in this video.
th3dstudio.com
Let's continue to learn things together.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
This video walks through the installation of the TH3D EZboard Creality motherboard upgrade that is a drop-in replacement for the Creality CR10 and Ender line of printers. Over the course of the last year, I have replaced the extruder, print bed, Bowden tube, firmware and hot end on my Ender 5. This amounts to over $300 of upgrades to a $340 printer. Does this make sense? Is it worth it? With all of these upgrades is this Ender 5 better than a Prusa i3 Mk3?
After watching the video please leave your opinions in the comments about spending hundreds of dollars to upgrade a 3d printer vs purchasing a higher-priced printer with the features already installed.
Here is a link to the TH3D website where you can purchase the EZboard featured in this video.
th3dstudio.com
Let's continue to learn things together.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
