Uploaded November 2024 | Updated November 2026, 3 hours ago
Hey Folks,
Designed and constructed in 2016-2019 as a companion project to the Antikythera mechanism, this video series is an alternative look at the second oldest geared mechanism from antiquity: The Byzantine (London) Sundial-Calendar.
I designed the project as a sort of 'gateway' project into more complex horological work, especially if you're already comfortable with model engineering, and maybe feel like tackling something a little unusual. I've seen some outstanding builds of this project over the intervening years and would love to see more. So, if you'd like to build along with the series and help me make these videos, the plans for the project are available as part of the $1 tier on Patreon, find out more here: patreon.com/clickspring/about
Those of you who are Patrons will notice that for this YouTube release of the series I've spruced up the intro card and soundtrack, and also combined a few episodes together to make it all a bit more efficient for the viewer. For those who are seeing this narrated build series for the first time, do please enjoy!
Cheers.
Chris.
Join YouTube Channel Memberships here: youtube.com/channel/UCworsKCR-Sx6R6-BnIjS2MA/join
Become a Clickspring Patron here: patreon.com/clickspring/membership
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Mike Manfrin
Steven Sladewski
Peter John Richardson
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Andre van Soest
Sam Towne
Adam Slagle
Bernd Fischer
Rudolph Bescherer Jr
Robin Haerens
Mitchell Collins
Daniel Taraldsen
Jeremiah G. Mort
L'Enfant Watch Company
Rollin W. Patrick, Jr.
C. A. Patrick Voigt
Jack Cause
Daniel Taraldsen
Jeremiah G. Mort
Andrew Smith
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
John Maksim
RobinP556
Lea Bruder
Armagus
John S Dilsaver
matt mcparland
Daniel Cohen
Larry Pardi
Sean Kuyper
Samuel Irons
Dan Keen
Florian Ragwitz
Matthew Middleton
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Dave Seff
Tim Bray
________________________________________________________
References:
Original Artefact:
collection.sciencemuseumgroup.org.uk/objects/co1082/byzantine-sundial-calendar-sundial-perpetual-calendar
Michael T. Wright (curator): en.wikipedia.org/wiki/Michael_T._Wright_(curator).
J.V. Field & M.T. Wright, “Gears from the Byzantines: a Portable Sundial with Calendrical Gearing”, Annals of Science, 42 (1985), pp. 87 – 138.
D.R. Hill, “Al-Bīrūnī’s Mechanical Calendar”, Annals of Science, 42 (1985), pp.139 – 163.
J.V. Field, “Some Roman and Byzantine Portable Sundials and the London Sundial-Calendar”, History of Technology, 12 (1990), pp. 103 – 135.
M.T. Wright, “Rational and Irrational Reconstruction: the London Sundial-Calendar and the Early History of Geared Mechanisms”, History of Technology, 12 (1990), pp.65 – 102.
Etching Supplies:
Dry Film Photosensitive Film amzn.to/48KjsJ5
Developer solution: Sodium Carbonate (aka Washing Soda, Soda Ash) is mixed 10g per litre, and used at room temperature.
Etchant Solution: Ferric Chloride (approx 42%) eg https://www.altronics.com.au/p/h0800-ferric-chloride-copper-etchant-500ml/
Silvering powders: Any professional clock supplies store.
Vector Graphic Software:
Inkscape (free, open source) - inkscape.org/release/0.92.3
Amazon Affiliate links:
Tools & Shop Products:
Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/48Ofcac
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Spotting Drill Bit: amzn.to/48KiTO5
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Blue Matador Abrasive Paper: amzn.to/3yLBhtL
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l
Tix Solder (Pkg. of 20 Three Inch Sticks) amzn.to/48B5QQo
Tix Flux 1/2oz amzn.to/3UG7ESt
Birchwood Casey E & F Super Blue Liquid Gun Blue 90 Ml amzn.to/3AxWMiz
Hey Folks,
Designed and constructed in 2016-2019 as a companion project to the Antikythera mechanism, this video series is an alternative look at the second oldest geared mechanism from antiquity: The Byzantine (London) Sundial-Calendar.
I designed the project as a sort of 'gateway' project into more complex horological work, especially if you're already comfortable with model engineering, and maybe feel like tackling something a little unusual. I've seen some outstanding builds of this project over the intervening years and would love to see more. So, if you'd like to build along with the series and help me make these videos, the plans for the project are available as part of the $1 tier on Patreon, find out more here: patreon.com/clickspring/about
Those of you who are Patrons will notice that for this YouTube release of the series I've spruced up the intro card and soundtrack, and also combined a few episodes together to make it all a bit more efficient for the viewer. For those who are seeing this narrated build series for the first time, do please enjoy!
Cheers.
Chris.
Join YouTube Channel Memberships here: youtube.com/channel/UCworsKCR-Sx6R6-BnIjS2MA/join
Become a Clickspring Patron here: patreon.com/clickspring/membership
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Mike Manfrin
Steven Sladewski
Peter John Richardson
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Andre van Soest
Sam Towne
Adam Slagle
Bernd Fischer
Rudolph Bescherer Jr
Robin Haerens
Mitchell Collins
Daniel Taraldsen
Jeremiah G. Mort
L'Enfant Watch Company
Rollin W. Patrick, Jr.
C. A. Patrick Voigt
Jack Cause
Daniel Taraldsen
Jeremiah G. Mort
Andrew Smith
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
John Maksim
RobinP556
Lea Bruder
Armagus
John S Dilsaver
matt mcparland
Daniel Cohen
Larry Pardi
Sean Kuyper
Samuel Irons
Dan Keen
Florian Ragwitz
Matthew Middleton
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Dave Seff
Tim Bray
________________________________________________________
References:
Original Artefact:
collection.sciencemuseumgroup.org.uk/objects/co1082/byzantine-sundial-calendar-sundial-perpetual-calendar
Michael T. Wright (curator): en.wikipedia.org/wiki/Michael_T._Wright_(curator).
J.V. Field & M.T. Wright, “Gears from the Byzantines: a Portable Sundial with Calendrical Gearing”, Annals of Science, 42 (1985), pp. 87 – 138.
D.R. Hill, “Al-Bīrūnī’s Mechanical Calendar”, Annals of Science, 42 (1985), pp.139 – 163.
J.V. Field, “Some Roman and Byzantine Portable Sundials and the London Sundial-Calendar”, History of Technology, 12 (1990), pp. 103 – 135.
M.T. Wright, “Rational and Irrational Reconstruction: the London Sundial-Calendar and the Early History of Geared Mechanisms”, History of Technology, 12 (1990), pp.65 – 102.
Etching Supplies:
Dry Film Photosensitive Film amzn.to/48KjsJ5
Developer solution: Sodium Carbonate (aka Washing Soda, Soda Ash) is mixed 10g per litre, and used at room temperature.
Etchant Solution: Ferric Chloride (approx 42%) eg https://www.altronics.com.au/p/h0800-ferric-chloride-copper-etchant-500ml/
Silvering powders: Any professional clock supplies store.
Vector Graphic Software:
Inkscape (free, open source) - inkscape.org/release/0.92.3
Amazon Affiliate links:
Tools & Shop Products:
Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/48Ofcac
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Spotting Drill Bit: amzn.to/48KiTO5
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Blue Matador Abrasive Paper: amzn.to/3yLBhtL
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l
Tix Solder (Pkg. of 20 Three Inch Sticks) amzn.to/48B5QQo
Tix Flux 1/2oz amzn.to/3UG7ESt
Birchwood Casey E & F Super Blue Liquid Gun Blue 90 Ml amzn.to/3AxWMiz







![Reconstructing The #Antikythera Mechanism - [PREVIEW]
Reconstructing The Antikythera Mechanism, by Clickspring
A video series documenting the reconstruction of The Antikythera Mechanism in its most authentic form to date, with the intention of establishing the precise machining tools, techniques and technology used to create it.
Thank you to the following viewers for suggesting this project:
Robert Heffernan
The Orbital Mechanics (@orbitalpodcast http://theorbitalmechanics.com )
Jeffrey Wright
Sharklops
Jason Therrien
Azayles
RealHogweed
John Newbury
theducks.org
Lord Perkele
Pepper Spray
Pedro Lobo
J. P. Fonseca
BisdremisKostas
Noel Zinger
Piotr Bojda
tony butcher
Brian Kerley
ian elley
Allan Sanderson
ShopTalk
Dimitri Masson
Adam Cato
Reggie land
MrSwift2568
Ralph McCoy
verymetl
Icel4nd3r
BoxedGod
Oscar Scheepstra
Tom Cummings
Adam Mann
Join YouTube Channel Memberships here: https://www.youtube.com/channel/UCworsKCR-Sx6R6-BnIjS2MA/join
Become a Clickspring Patron here: https://www.patreon.com/clickspring/membership
A very special thank you to Patrons Dan Keen, Samuel Irons, Sean Kuyper and Mark Kobey
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras:
Panasonic GH5 - https://amzn.to/2rEzhh2
Panasonic X920 - https://amzn.to/2wzxxdT
Tools & Shop Products:
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Solidworks 2013 Bible: http://amzn.to/2FObS1D
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
References:
Astrotalkuk.org episode26 Tony Freeth and the Antikythera mechanism: https://www.youtube.com/watch?v=Ik5qgd4kPCI courtesy Tony Freeth
Clips from “The 2000 Year Old Computer” courtesy Images First Ltd.
Reconstructing The Antikythera Mechanism, by Clickspring. Reconstructing The #Antikythera Mechanism - [PREVIEW]](https://i.ytimg.com/vi/dRXI9KLImC4/mqdefault.jpg)
![Clockmaking - [BONUS VIDEO] Chill Out Edit - 1000 Hours in 12 Minutes
Chill Out Edit - 1000 Hours in 12 Minutes, by Clickspring
All footage sourced from the long term project How To make a Clock In The Home Machine Shop:
Part 1 - Making The Frames https://youtu.be/B8Y146v8HxE
Part 2 - Machining The Pillars https://youtu.be/DoDkoioiR6w
Part 3 - The Washers And Screws https://youtu.be/KXzyCM23WPI
Part 4 - Cutting The Wheels https://youtu.be/ZSXDIraHz3k
Part 5 - Cutting The Pinions https://youtu.be/XkJJid3_bhg
Part 6 - Crossing Out The Wheels https://youtu.be/6bM3Jhy_3TU
Part 7 - Making The Barrel https://youtu.be/qOHSTxxAjFs
Part 8 - Making The Barrel Arbor https://youtu.be/b5KwOi-JkEU
Part 9 - Chapter Ring https://youtu.be/qpy5O0b7cL8
Part 10 - Bezel https://youtu.be/K6Ai5F8O3iI
Part 11 - Bezel Screws https://youtu.be/5sAw4Q1PM8Y
Part 12 - Collets And Other Arbors https://youtu.be/Yt20qj1DHpc
Part 13 - Planting The Train https://youtu.be/O8xIjsaDlN8
Part 14 - Barrel Click And Clickspring https://youtu.be/EUGSplH6gHM
Part 15 - The Dial Assembly https://youtu.be/NExV5ZS9nss
Part 16 - The Motion Work And Hands https://youtu.be/8OViP9AR2HE
Part 17 - Regulator & Suspension Post https://youtu.be/2Nle33eb1Uo
Part 18 - The Pendulum https://youtu.be/VlvcjrelL7I
Part 19 - Making The Legs And Base https://youtu.be/w5v_wmp7_14
Part 20 - The Crutch Assembly https://youtu.be/R9m4X_R9HPs
Part 21 - Mainspring And Escapement https://youtu.be/T28sGA597IE
Part 22 - The Stopwork Mechanism https://youtu.be/NsnLVYwqESM
Part 23 - The Key, Polishing & Assembly https://youtu.be/J3ZGlpDa-0g
Join YouTube Channel Memberships here: https://www.youtube.com/channel/UCworsKCR-Sx6R6-BnIjS2MA/join
Become a Clickspring Patron here: https://www.patreon.com/clickspring/membership
A very special thank you to Patrons Dan Keen, Samuel Irons, Sean Kuyper and Mark Kobey
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - https://amzn.to/2rEzhh2
Panasonic X920 - https://amzn.to/2wzxxdT
Tools & Shop Products:
Solidworks 2013 Bible: http://amzn.to/2FObS1D
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Blue Matador Abrasive Paper - https://amzn.to/2IAFiBT
Loctite 231097 603 Retaining Compound, 10 mL: http://amzn.to/2pid6vR
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Digital Calipers: https://amzn.to/2IkFh4O
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: https://amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: https://amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2 120 Degree 5 Pc Set CNC Machine: https://amzn.to/2G7ylv6
Anytime Tools 5 Lathe Mill CENTER DRILL : https://amzn.to/2IThppO
Sherline Lathe: http://amzn.to/2pnXM19
Hegner Scroll Saw: https://amzn.to/2IhteVW
Sherline CNC Rotary Table Indexer: http://amzn.to/2FJXmfv
Heavy Duty Arbor Press: http://amzn.to/2G4gog7
Ask Me A Question:
http://www.clickspringprojects.com/contact.html
Chill Out Edit - 1000 Hours in 12 Minutes, by Clickspring Clockmaking - [BONUS VIDEO] Chill Out Edit - 1000 Hours in 12 Minutes](https://i.ytimg.com/vi/dU7iKNmQBIs/mqdefault.jpg)

