Uploaded November 2025 | Updated September 2026, 2 weeks ago
Learn how to set up a HolidayCoro HinksPix Pro v1, v2, or v3 for DMX 1990 output using the controller web interface.
This video shows how to wire the DMX output connector, configure a DMX 1990 output in the HinksPix Pro design tab, assign a universe and channel count, map the DMX output to the physical port, save and install the controller configuration, and verify the output on the E1.31 tab. It also covers daisy chaining multiple DMX devices and setting device addresses correctly within a single universe.
This tutorial is helpful for users controlling moving heads, PAR cans, snow machines, and other DMX devices from a HinksPix Pro controller without using xLights for setup. It explains how the controller outputs one universe of data, why the channel count must be entered in groups of three, and how to load the saved configuration so your software can send data to the correct universe and channels.
Learn more at: HolidayCoro.com/HinksPix
Learn how to set up a HolidayCoro HinksPix Pro v1, v2, or v3 for DMX 1990 output using the controller web interface.
This video shows how to wire the DMX output connector, configure a DMX 1990 output in the HinksPix Pro design tab, assign a universe and channel count, map the DMX output to the physical port, save and install the controller configuration, and verify the output on the E1.31 tab. It also covers daisy chaining multiple DMX devices and setting device addresses correctly within a single universe.
This tutorial is helpful for users controlling moving heads, PAR cans, snow machines, and other DMX devices from a HinksPix Pro controller without using xLights for setup. It explains how the controller outputs one universe of data, why the channel count must be entered in groups of three, and how to load the saved configuration so your software can send data to the correct universe and channels.
Learn more at: HolidayCoro.com/HinksPix
