Composite video from Arduino UNO @ceptimus
Composite video from Arduino UNO  @ceptimus
Uploaded March 2022 | Updated November 2026, 3 hours ago
Explaining how to generate a fairly high resolution composite video signal from an Arduino UNO (or Nano or similar) using just three resistors. The signal is up to about 380 pixels wide by 270 pixels high. The UNO doesn't have enough RAM to hold bit mapped graphics that size, so you're limited to text or other block-graphic style displays. The Arduino Mega 2560 has much more RAM, and four serial ports (the video generation ties up one of the serial ports), so is better suited to this kind of task. The resistor values aren't that clear because of my scribbly handwriting. The one from pin 1 is 1000 ohms, the one from pin 5 is 47 ohms, and the one from pin 9 is 1200 ohms.
You can download the sketch using this link: ceptimus.co.uk/CompositeVideoTerminal.zip
Composite video from Arduino UNODynam Cessna 188 crop dusterGarys rotor - all LEDs now working.Test flying the Thunder Tiger ScooterCarrier Wave transmission test of the LGT8F RF-NANOProgramming a part-built POV kit boardArduino SBUS decoder updateDassault Rafale at ADMFCUsing an Arduino UNO to program the Banggood POV kitATtiny85 Galloping Ghost DriverArduino 18 channel PWM to SBUS and SBUS to PWMOctagonal star kit. Work in progress.
ceptimus |

Composite video from Arduino UNO

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER