Uploaded August 2025 | Updated November 2026, 2 days ago
🎮 What Is a Raster Interrupt?
A *Raster interrupt* is a signal generated by the VIC-II video chip of the C64 when the raster (the screen’s scanline) reaches a specific line. This allows the processor to execute custom code at that exact moment on the screen.
🧠 What Is It Used For?
With a bit of machine language programming, you can achieve advanced graphical effects, such as:
- Displaying text and high-resolution graphics simultaneously
- Showing more than 8 hardware sprites on screen
- Changing colors or video modes at specific points on the screen
🕹️ Practical Use
- Widely used in games and demos to create dynamic visual effects
- Other 8-bit computers (Atari 800, MSX, Amstrad CPC) use similar techniques
- The C128 in 80-column mode does not support this type of interrupt
⚙️ How to Set It Up
- Configure the VIC-II to generate the interrupt instead of the CIA-1 timer
- It’s crucial to temporarily disable interrupts (SEI) during setup to avoid crashes
- You can chain multiple interrupt routines to manage different raster lines
📺 Practical Example
A routine can change the screen border color at a specific raster line, creating a visible colored stripe. With multiple routines, you can split the screen into sections with different graphic modes (e.g., text on top, graphics below).
FairLight TV: [youtube.com/watch?v=0KhH4YrUsXo](https://www.youtube.com/watch?v=0KhH4YrUsXo)
Telegram : t.me/projectCD_Chronicles
#C64Assembly #RetroCoding #RasterInterrupt #DemoScene #WooblingFX #DoubleRaster
#VICIIpower #8bitArt #CodeLikeIts1984 🕹️👾
🎮 What Is a Raster Interrupt?
A *Raster interrupt* is a signal generated by the VIC-II video chip of the C64 when the raster (the screen’s scanline) reaches a specific line. This allows the processor to execute custom code at that exact moment on the screen.
🧠 What Is It Used For?
With a bit of machine language programming, you can achieve advanced graphical effects, such as:
- Displaying text and high-resolution graphics simultaneously
- Showing more than 8 hardware sprites on screen
- Changing colors or video modes at specific points on the screen
🕹️ Practical Use
- Widely used in games and demos to create dynamic visual effects
- Other 8-bit computers (Atari 800, MSX, Amstrad CPC) use similar techniques
- The C128 in 80-column mode does not support this type of interrupt
⚙️ How to Set It Up
- Configure the VIC-II to generate the interrupt instead of the CIA-1 timer
- It’s crucial to temporarily disable interrupts (SEI) during setup to avoid crashes
- You can chain multiple interrupt routines to manage different raster lines
📺 Practical Example
A routine can change the screen border color at a specific raster line, creating a visible colored stripe. With multiple routines, you can split the screen into sections with different graphic modes (e.g., text on top, graphics below).
FairLight TV: [youtube.com/watch?v=0KhH4YrUsXo](https://www.youtube.com/watch?v=0KhH4YrUsXo)
Telegram : t.me/projectCD_Chronicles
#C64Assembly #RetroCoding #RasterInterrupt #DemoScene #WooblingFX #DoubleRaster
#VICIIpower #8bitArt #CodeLikeIts1984 🕹️👾










