Uploaded September 2025 | Updated November 2026, 3 days ago
**FEATURES**
Telegram: https://t.me/projectCD_Chronicles
The Commodore 128 was a home computer developed by Commodore in 1984 to recover from the failure of the 264 series and replace the C64. Due to time constraints, the project was led by Bil Herd with a tight deadline of 5 months to present it at the Consumer Electronics Show (CES) in Las Vegas in January 1985.
**Development and Hardware Features**
The project began with a prototype called D128 and was later redesigned with an architecture more similar to the C64, including a new color graphics chip. One of the biggest challenges was integrating backward compatibility with the C64, a requirement added mid-development by management. To achieve this, the new MOS 8502 CPU and MOS 8563 video chip (for 80 columns) were paired with all the C64 coprocessors, including the VIC-II and SID, allowing the C128 to operate in multiple modes.
For the semi-professional market, a second CPU was added—the Zilog Z80—which enabled the use of the extensive software library of the CP/M operating system. Despite initial technical issues like overheating of the 8563 chip and synchronization problems between graphics chips, the computer was presented on time.
**Operating Modes**
The C128 was marketed as "three computers in one" thanks to its multiple modes:
- **128 Mode**: The native mode, with the 8502 CPU running at 2 MHz and BASIC 7.0. It used the MOS 8563 chip for 80 columns (640x200 pixels) and the VIC-II for 40 columns.
- **64 Mode**: Emulated the C64, lowering the CPU frequency to 1 MHz and using BASIC 2.0. Compatibility was nearly complete thanks to the presence of the C64 ROMs and coprocessors.
- **CP/M Mode**: Activated by the Z80 CPU, it allowed execution of professional software for this operating system, which was a benchmark before the rise of MS-DOS.
**Failure and Discontinuation**
Despite its advanced features and attempt to compete with IBM PCs and Macintoshes, the C128 did not achieve the expected success. Its main weakness was the inability to compete with professional PCs of the time, especially since the CP/M standard was already fading in favor of MS-DOS. Additionally, the lack of software specifically designed for its new features and the fact that many users bought it simply as an "enhanced" C64 led to its rapid decline. Production ceased at the end of 1989.
**BASIC COMMANDS**
Syntax:
basic
PRINT #n, USING "format";
The parameter *n* is the file number. If present, it sends the output to a device other than the screen (disk, printer, modem); if absent, the result appears on the screen. The *format* string defines how the variables (string or numeric) that follow should be printed.
The *format* consists of special symbols that define how characters should be treated in the corresponding position in another string or numeric variable. It can be placed immediately after the word USING, or defined separately as a string variable (e.g., A$ = "###.######"), and then inserted in the same place in the instruction. This means you can build a repertoire of formats to use as needed, even stored in a series of DATA statements.
**PUDEF** allows you to take certain characters contained in the string or numeric variable to be printed according to the defined format, and replace them with others. But first, let’s see what we can do with PRINT USING.
Available symbols:
# + - . , $ ^^^^ =
Among these, *# + - . , $ and ^^^^* can be used with numeric variables, while the three symbols *# =* are used with strings. The *#* symbol reserves a position for a character: the number of *#* must be at least equal to the number of desired characters, otherwise no number will be printed—just a series of ****—and a string will be truncated.
**PUDEF "..."**
The PUDEF instruction is so small and simple it might seem trivial,
but it allows you to tell the computer to print a different character instead of:
space, comma, period, dollar
basic
PUDEF "*.,L"
#RetroTech #Commodore128 #C64 #CPM #BASIC #ComputerHistory #TechFails #Nostalgia #Anni80 #BilHerd #CES1985 #GeekAlert
**FEATURES**
Telegram: https://t.me/projectCD_Chronicles
The Commodore 128 was a home computer developed by Commodore in 1984 to recover from the failure of the 264 series and replace the C64. Due to time constraints, the project was led by Bil Herd with a tight deadline of 5 months to present it at the Consumer Electronics Show (CES) in Las Vegas in January 1985.
**Development and Hardware Features**
The project began with a prototype called D128 and was later redesigned with an architecture more similar to the C64, including a new color graphics chip. One of the biggest challenges was integrating backward compatibility with the C64, a requirement added mid-development by management. To achieve this, the new MOS 8502 CPU and MOS 8563 video chip (for 80 columns) were paired with all the C64 coprocessors, including the VIC-II and SID, allowing the C128 to operate in multiple modes.
For the semi-professional market, a second CPU was added—the Zilog Z80—which enabled the use of the extensive software library of the CP/M operating system. Despite initial technical issues like overheating of the 8563 chip and synchronization problems between graphics chips, the computer was presented on time.
**Operating Modes**
The C128 was marketed as "three computers in one" thanks to its multiple modes:
- **128 Mode**: The native mode, with the 8502 CPU running at 2 MHz and BASIC 7.0. It used the MOS 8563 chip for 80 columns (640x200 pixels) and the VIC-II for 40 columns.
- **64 Mode**: Emulated the C64, lowering the CPU frequency to 1 MHz and using BASIC 2.0. Compatibility was nearly complete thanks to the presence of the C64 ROMs and coprocessors.
- **CP/M Mode**: Activated by the Z80 CPU, it allowed execution of professional software for this operating system, which was a benchmark before the rise of MS-DOS.
**Failure and Discontinuation**
Despite its advanced features and attempt to compete with IBM PCs and Macintoshes, the C128 did not achieve the expected success. Its main weakness was the inability to compete with professional PCs of the time, especially since the CP/M standard was already fading in favor of MS-DOS. Additionally, the lack of software specifically designed for its new features and the fact that many users bought it simply as an "enhanced" C64 led to its rapid decline. Production ceased at the end of 1989.
**BASIC COMMANDS**
Syntax:
basic
PRINT #n, USING "format";
The parameter *n* is the file number. If present, it sends the output to a device other than the screen (disk, printer, modem); if absent, the result appears on the screen. The *format* string defines how the variables (string or numeric) that follow should be printed.
The *format* consists of special symbols that define how characters should be treated in the corresponding position in another string or numeric variable. It can be placed immediately after the word USING, or defined separately as a string variable (e.g., A$ = "###.######"), and then inserted in the same place in the instruction. This means you can build a repertoire of formats to use as needed, even stored in a series of DATA statements.
**PUDEF** allows you to take certain characters contained in the string or numeric variable to be printed according to the defined format, and replace them with others. But first, let’s see what we can do with PRINT USING.
Available symbols:
# + - . , $ ^^^^ =
Among these, *# + - . , $ and ^^^^* can be used with numeric variables, while the three symbols *# =* are used with strings. The *#* symbol reserves a position for a character: the number of *#* must be at least equal to the number of desired characters, otherwise no number will be printed—just a series of ****—and a string will be truncated.
**PUDEF "..."**
The PUDEF instruction is so small and simple it might seem trivial,
but it allows you to tell the computer to print a different character instead of:
space, comma, period, dollar
basic
PUDEF "*.,L"
#RetroTech #Commodore128 #C64 #CPM #BASIC #ComputerHistory #TechFails #Nostalgia #Anni80 #BilHerd #CES1985 #GeekAlert



![📟CrustyBASIC:💾 il compilatore BASIC moderno per sistemi 8‑bit 🕹️
Crusty Basic
CrustyBASIC è un cross‑compiler BASIC scritto in Rust, progettato per convertire programmi BASIC in codice macchina nativo per computer e console degli anni ’80.
Obiettivo: velocizzare l’esecuzione rispetto agli interpreti BASIC originali.
Funziona su Windows, macOS e Linux.
🖥️ Piattaforme supportate
CrustyBASIC può generare codice per una vasta gamma di sistemi retro:
- Apple: ][+, //c, //e
- Atari: 400/800/XL/XE, 5200, 2600
- Commodore: C64, C64u, 128, Plus/4, VIC‑20
- Tandy/Radio Shack: CoCo 1, 2, 3
- PC MS‑DOS: 16‑bit
- Windows: 64‑bit GDI e console, da XP a Win11
- Nintendo NES
⚙️ Funzionamento
CrustyBASIC:
- prende file .cbs Crusty BASIC Source
- li compila in assembly o direttamente in eseguibili per la piattaforma target
- può integrarsi con assemblatori esterni es. vasm per generare file .prg, .nes, .bin ecc.
📚 Documentazione disponibile
Il progetto include:
- Usage guide: comandi, target, dialetti BASIC, assemblatori, esempi
- Language reference: sintassi del linguaggio
- API reference: runtime portabile grafica, suono, input, capacità hardware
- Target documentation: note specifiche per ogni macchina supportata
CrustyBASIC è un tool moderno per sviluppare software retro, permettendo di scrivere in BASIC ma ottenere codice nativo veloce, con supporto per moltissime piattaforme storiche e una documentazione completa.
itch.io : https://telengard.itch.io/crustybasic
github : https://github.com/bsturk/crustybasic
vasm : http://www.compilers.de/vasm.html
nasm : https://www.nasm.us/pub/nasm/releasebuilds/3.02/win64/
#CrustyBASIC #RetroComputing #BASICCompiler #RustLang #C64Dev #AppleII #AtariXL #VIC20 #NESDev #RetroCoding #CrossCompiler #HomebrewDev #8bitDevelopment #RetroTech #CodingVintage 📟CrustyBASIC:💾 il compilatore BASIC moderno per sistemi 8‑bit 🕹️](https://i.ytimg.com/vi/Q6EUYB8XP7k/mqdefault.jpg)



![🚀 Programma Giochi 8-Bit nel Browser! Nuovo IDE Retro con C64, VIC-20 e BBC Micro ... 🕹 !!!
🕹️ IDE di Programmazione Retro Online: novità per BBC Micro, C64 e Vic 20!
Benvenuti nel mondo di RetroGameCoders IDE: un ambiente di sviluppo web per programmare giochi e demo su sistemi a 8 bit, direttamente dal browser. Dopo mesi di lavoro, è finalmente pronto per essere condiviso!
🚀 Novità principali
- Programmazione in C per BBC Micro con compilatore CC65 online
- Supporto Vic 20 in C, sempre via CC65
- Editor moderno per C e BASIC su C64, integrato con l’emulatore Vice64 nel browser
🔧 Avvia l’IDE
Supporta:
- C64 BASIC
- Vic 20
- BBC Micro + CC65
🛠️ Dietro le quinte: lo sviluppo dell’IDE
Ho creato un fork personalizzato di [8bitworkshop], un tool per C e Assembly con emulatori integrati. Sebbene sia eccellente, mancavano alcune funzionalità per i miei tutorial. Così ho deciso di espandere:
- Inclusione del Vic 20, il mio primo computer
- Supporto al BBC Micro, icona dell’informatica UK
- Migliorie al BASIC del C64: tokenizer, etichette, niente numeri di linea
🖥️ Piattaforme ed emulatori supportati
- Commodore 64
- VIC-20
- Atari 8-bit
- Apple II
- BBC Micro
- ZX Spectrum
- Amstrad CPC
- NES
- Sega Master System
- ColecoVision
- Z-Machine (narrativa interattiva)
- ...e altri in arrivo!
⚙️ Come funziona
L’editor usa CodeMirror, con evidenziazione della sintassi. Gli emulatori (Z80, 6809, 6502) sono basati su progetti JavaScript come Vice, Chips e JSBeeb. Per il C64, uso il Kernal di Vice, più preciso per le mie demo. I compilatori sono convertiti in WebAssembly tramite Emscripten, così tutto gira localmente nel browser, senza trasferimenti di dati.
📁 Gestione del codice
- Demo e esempi disponibili nei menu
- Il tuo codice è salvato in un file system virtuale nel browser: privato e locale
- Attenzione: la memoria locale può essere cancellata, quindi fai backup manuali
- Ho rimosso l’integrazione GitHub per semplicità e privacy
🔮 Piani futuri
Vorrei che alcune migliorie fossero integrate in 8bitworkshop, ma nel frattempo ecco cosa ho in mente:
- Supporto a Commodore PET, Tandy CoCo, Dragon 32
- Target CP/M
- Sistemi 16-bit: Amiga, Atari ST
- BBC Atom ed Electron
- Compilatore TRSE online
- Editor migliorato per scrittura più fluida
- Nuovi strumenti: editor sprite, caratteri, gestori dischi
❓ FAQ
- Gli emulatori attuali resteranno disponibili
- Bug o richieste? Scrivimi, valuterò se dipende da me o da progetti esterni
- Vuoi aiutare? Condividi il progetto e mandami feedback
⏭️ Prossimi passi
Prova l’IDE così com’è. Presto arriveranno più tutorial, funzionalità e piattaforme!
🔗 [Retro Game Coders – IDE Retro Online](https://retrogamecoders.com/bbc-cc65-c64-vic-20/)
#RetroCoding #C64Forever #VIC20 #BBCMicro #BasicProgramming #CC65 #8BitDev #GameDev #CodeInBrowser #EmulatorMagic #OldSchoolTech #WebIDE #NostalgiaDigitale 🚀 Programma Giochi 8-Bit nel Browser! Nuovo IDE Retro con C64, VIC-20 e BBC Micro ... 🕹 !!!](https://i.ytimg.com/vi/Tf1K-oWiND0/mqdefault.jpg)



Basic64JS: [Project Homepage](https://joystickandcursorkeys.github.io/basic64-js/index.html)
Emulator: [Experimental Version](https://joystickandcursorkeys.github.io/basic64-js/versions/experimental/index.html)
Wiki: [C64 Commands](https://www.c64-wiki.com/wiki/C64-Commands)
Commands: [C64 Command List](https://www.c64-wiki.com/wiki/C64-Commands)
Examples: [Example Programs](https://github.com/JoystickAndCursorKeys/basic64-js/wiki/Examples)
#Commodore64 #C64 #Basic #Online #Programming #Emulation #RetroGaming #BASIC #CodingFun #VintageTech #PETSCII Relive the magic 🔥 of COMMODORE Basic 🎮 in your browser!🚀](https://i.ytimg.com/vi/Tp1b38wXVJ8/mqdefault.jpg)