Commercial Condensate Drain Leaking? Trap, Vent, and Slope Fix @HVACS
Commercial Condensate Drain Leaking? Trap, Vent, and Slope Fix  @HVACS
Uploaded October 2026 | Updated November 2026, 2 hours ago
Commercial condensate drain leaking and you can't figure out why? In this video, Jesus walks through a 10-ton commercial unit with a poorly built condensate drain. It has a shallow trap, a vent with no slope after it, and a drain pan that isn't seated correctly.

Commercial systems aren't like a quick residential install under the case. Drop ceilings, larger equipment, and higher static pressure mean you can't just throw in a couple of inches of drop and call it good. Jesus explains why you need to check static pressure first and find out whether the drain is under positive or negative pressure. On this positive-pressure system, a clean-out left wide open in place of a real trap pulls in air and the unit never drains properly. That leads to overflow and water leaking into the ceiling.

Then Jesus rebuilds the drain the right way:

Reseating the drain pan so it sits correctly
Sizing the trap from the manufacturer's manual instead of relying on rules of thumb
Installing a clean-out tee without letting it replace the trap
Making sure the vent sits higher than the drain pan
Running the drain line downhill at a quarter inch per foot of slope

If you're chasing callbacks on overflowing commercial units, this trap, vent, and slope fix is where to start.

---

NEXT VIDEO

Commercial HVAC Drain Cleaning: Pro Tips That Prevent Callbacks
youtube.com/watch?v=DMo1FtdNWeg&t=106s

KEEP LEARNING


Start here:
hvacrschool.com/start

Free HVAC/R training, tech tips, quizzes, calculators, courses, and more:
hvacrschool.com

Listen to the HVAC School podcast:
hvacrschool.com/podcast

Get the HVAC School app:
hvacrschool.com/apps-page

HVAC School provides free HVAC/R training—primarily for techs, by techs. The goal is not just to collect facts. It is to understand the system well enough to apply what you know in the field.

Questions or corrections? Leave a comment and include the equipment model, measurements, and source when you can. None of us gets everything right, and good measurements beat confident guesses.

This content is educational. Follow manufacturer instructions, use proper PPE and safe work practices, and comply with the codes and standards that apply to your equipment and jurisdiction.
Commercial Condensate Drain Leaking? Trap, Vent, and Slope FixTXV, Airflow & the Refrigeration Cycle FundamentalsNAVAC NVR2 Valve Core Tool Demo - HVAC Tech EssentialRecurring Drain Issues w/ Bryan OrrThe Orbiting Scroll Doesn’t Spin | Jeff Kukert #ShortsHiring Better Technicians and TradespeopleHVAC Installation Best Practices: Copper Lines, Equipment Prep & Quality Control TipsRetrotec Duct Leakage & House Pressure DemoThank You to Our 7th Annual HVAC/R Training Symposium Sponsors!Uncovering the Root Causes of Commercial Refrigeration FailuresHow to Thaw and Diagnose a Frozen Walk-In EvaporatorSauermanns NEW Digital Manifolds & Tools with Tyler Nelson
HVAC School |

Commercial Condensate Drain Leaking? Trap, Vent, and Slope Fix

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER