Uploaded January 2021 | Updated November 2026, 3 hours ago
This tutorial shows you step by step how to create the Bistro Sign/Sandwich board for my Coffee & Friends design team project for Country Craft Creations.
There are two parts to this tutorial because I accidentally hit my mouse and stopped the video.
Cutting Guide
Front & Back of Sign: (2) 7 x 9 pieces of medium weight Chipboard
Mini Album Shelf: (1) 4 x 7 piece of medium weight Chipboard
Top of Spine: (1) 1 1/2 x 7 piece of medium weight Chipboard
Handle: (1) 2 x 7 piece of cardstock. Scor down the middle at 1". Adhere closed so that you are left with 1 piece at 1 x 7
Construction strips - 1/2 x 12 cardstock. Scor down the middle at 1/2" and apply score tap
Sign Front: make a small mark on the left side at 1 1/2" up from the bottom. Make that same mark on the right side, then connect the two dots with a line. Then measure 1 inch from the left side and draw a line from the line you marked at 1 1/2" to the bottom of the piece of chipboard. Repeat this on the right side. This will create the "Feet" of the board. Cut out the rectangle in the bottom center (between the two "feet").
Sign Back: repeat the same steps as the sign front
Attach the "shelf"
Measure 2 inches up from the very bottom of the sign
Attach to the front and the back of the sign using the construction strips
Spine
Attach construction strips to both long sides and attach to the top of both the front and back of the sign.
This tutorial shows you step by step how to create the Bistro Sign/Sandwich board for my Coffee & Friends design team project for Country Craft Creations.
There are two parts to this tutorial because I accidentally hit my mouse and stopped the video.
Cutting Guide
Front & Back of Sign: (2) 7 x 9 pieces of medium weight Chipboard
Mini Album Shelf: (1) 4 x 7 piece of medium weight Chipboard
Top of Spine: (1) 1 1/2 x 7 piece of medium weight Chipboard
Handle: (1) 2 x 7 piece of cardstock. Scor down the middle at 1". Adhere closed so that you are left with 1 piece at 1 x 7
Construction strips - 1/2 x 12 cardstock. Scor down the middle at 1/2" and apply score tap
Sign Front: make a small mark on the left side at 1 1/2" up from the bottom. Make that same mark on the right side, then connect the two dots with a line. Then measure 1 inch from the left side and draw a line from the line you marked at 1 1/2" to the bottom of the piece of chipboard. Repeat this on the right side. This will create the "Feet" of the board. Cut out the rectangle in the bottom center (between the two "feet").
Sign Back: repeat the same steps as the sign front
Attach the "shelf"
Measure 2 inches up from the very bottom of the sign
Attach to the front and the back of the sign using the construction strips
Spine
Attach construction strips to both long sides and attach to the top of both the front and back of the sign.










